If this is your first visit, be sure to
check out the Rules and Help. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
no wonder the Trex500 not too much smaller... ur logo getting smaller and smaller
Originally posted by JYHELI
It is not a Logo 5000, but a customise Logo 460 3D.
Logo 460 3D specification
Rotor diameter : 1106mm
Rotor blades: 463mm
Main gear ration: 10.4:1 - Mod.0.5
Weight:2.4kg
Battery: 6S Lipo Kong Power 3200mah
Logo 500 3D specification
Rotor diameter : 1150mm to 1190mm
Rotor blades: 500/520mm
Main gear ration: 8,7:1 to 12.8:1 - Mod.0.5
2.2kg and up
Battery: 5S to 6S LiPoly
Logo 600 3D specification
Rotor diameter: 1250mm to 1450mm
Rotor blades: 600/620/650mm
Main gear ratio: 8,1:1 to 12,9:1, Mod. 0.7
Weight: 3.2 kg and up
Battery: 6S to 10S LiPoly
Heli:
. Quick Japan EP8 EX (A30-8XL+CC60+Gy401)
. Raptor 50 Titan (OS50+522+CarbSmart+Gy611)
. Trex 600 EP (1512/3D+CC110HV+DS760 w/8900)
. Trex 600 N (RL53+523+CarbSmart+DS760 w/8900)
. B/W Stratus (OS91 SZ+MP5+ATG+CarbSmart+DS760 w/8900+8717)
Plane:
. Ok Model Medallion
. E*Star Storch
. ElectriFly S.E.5a
. Mpx EzGlider (Slope)
Comment