For Pavehawk,
Motor: MTM 450TH
ESC: Castle Creations PHX-35A
Battery: TP 2100mAH, 4S1P
Pinion: 11Teeth
If u are running at high kv motor like 3200kv and above, then u have to use the smallest pinion teeth count u can find. If u going to run at around 80% throttle and above, your motor will spin like hell but normally high kv motor has lower torque. With that, it can't handle the load thus motor easily burn out.
That is why I prefer lower kv with higher torque motor instead.
For Pavehawk and your Airwolf, maybe u can try MTM 450TH or any outrunner motor that is withing 2000kv to 2990kv
SH
Motor: MTM 450TH
ESC: Castle Creations PHX-35A
Battery: TP 2100mAH, 4S1P
Pinion: 11Teeth
If u are running at high kv motor like 3200kv and above, then u have to use the smallest pinion teeth count u can find. If u going to run at around 80% throttle and above, your motor will spin like hell but normally high kv motor has lower torque. With that, it can't handle the load thus motor easily burn out.
That is why I prefer lower kv with higher torque motor instead.
For Pavehawk and your Airwolf, maybe u can try MTM 450TH or any outrunner motor that is withing 2000kv to 2990kv
SH
Comment