T E A M
upgrade g3 to g3.5 for free at
-
For sale
trex 700/ 12mm main shaft swash leveller. carbon type $22 only new -
Yeah, the G3.5 looks cool....
Airplane:
GWS Zero Fighter (retired)
Phoenix .40 Classic Trainer (crashed)
Phoenix .40 Laser (retired)
GWS Estarter (building)
Helicopter:
Hirobo Sceadu Evo 50 w/ .30 engine (retired)
Trex 450XL CDE (retired)
Its not the takeoff and flying, its the landing and repairing, so that you can takeoff and fly again...Comment
-
Guys, is simulator harder to fly than real life?
Airplane:
GWS Zero Fighter (retired)
Phoenix .40 Classic Trainer (crashed)
Phoenix .40 Laser (retired)
GWS Estarter (building)
Helicopter:
Hirobo Sceadu Evo 50 w/ .30 engine (retired)
Trex 450XL CDE (retired)
Its not the takeoff and flying, its the landing and repairing, so that you can takeoff and fly again...Comment
-
....
every heli is different
Helis
Logo 500 3D
Once upon a time , there were frequency pins , flybars and nitros...
Comment
-
anyone feel that g3.5 the heli is overly powerful, like no matter what you do also cannot bog the heli?
sigpicComment
-
not too sure abt g3.5
im using reflex XTR
the heli doesnt bog as much in terms of performance too on bad collective management.. but it'll be obvious in the rotor sound.. normally i'll try to keep the sound constant when performing most moves.. does help me in collective management on a real heli.
Originally posted by baby_zyklonHeli:
. Quick Japan EP8 EX (A30-8XL+CC60+Gy401)
. Raptor 50 Titan (OS50+522+CarbSmart+Gy611)
. Trex 600 EP (1512/3D+CC110HV+DS760 w/8900)
. Trex 600 N (RL53+523+CarbSmart+DS760 w/8900)
. B/W Stratus (OS91 SZ+MP5+ATG+CarbSmart+DS760 w/8900+8717)
Plane:
. Ok Model Medallion
. E*Star Storch
. ElectriFly S.E.5a
. Mpx EzGlider (Slope)
Tx: JR 9XII
Photo toy
. Canon 7D & 500D
. Canon 430EX & 580EX2
. Canon 24-70 f2.8L
. Canon 85mm f1.8
. Tamron 10-22 ultrawide
Comment
-
Which heli are you using?Originally posted by baby_zyklonComment
-
using the sevin raptor 50 with os 37szh. Sometimes use caliber 30 from expansion, changed to 600mm blades and increase pitch/cyclic/tail rotor size with lightened paddle, but still using 37szh engine. Either my real life hyper is severly underpower or g3.5 37 is very powerful, coz somehow I feel that its about the same power
Their hyper is unreal, 1.8hp peak output, under real life condition with muffler and even 30%nitro where got engine reach factory output one 
BTW, not supporting piracy, but just let fellow rf owners know that... expansion pack can download from BT
sigpicComment
-
How to start heli engine using G3? When i selected the heli, it is dead when started. But no problems for aircraft...
Airplane:
GWS Zero Fighter (retired)
Phoenix .40 Classic Trainer (crashed)
Phoenix .40 Laser (retired)
GWS Estarter (building)
Helicopter:
Hirobo Sceadu Evo 50 w/ .30 engine (retired)
Trex 450XL CDE (retired)
Its not the takeoff and flying, its the landing and repairing, so that you can takeoff and fly again...Comment
-
Are you in throttle holdOriginally posted by BlackHawk
Don't PCW
Beam E4
Flybarless Trex 600N VBAR 4.0 | OS50 Hyper
Trex 700 LE | YS91SR3CComment
-
What do you mean?Originally posted by helirulzAre you in throttle hold
Airplane:
GWS Zero Fighter (retired)
Phoenix .40 Classic Trainer (crashed)
Phoenix .40 Laser (retired)
GWS Estarter (building)
Helicopter:
Hirobo Sceadu Evo 50 w/ .30 engine (retired)
Trex 450XL CDE (retired)
Its not the takeoff and flying, its the landing and repairing, so that you can takeoff and fly again...Comment
-
The switch on right top-hand corner. Make sure it is down.Originally posted by BlackHawkDon't PCW
Beam E4
Flybarless Trex 600N VBAR 4.0 | OS50 Hyper
Trex 700 LE | YS91SR3CComment
-
lolHelis
Logo 500 3D
Once upon a time , there were frequency pins , flybars and nitros...
Comment
-
going to try the 3.5v
Comment
-
How to map futaba 6EXA to RealFlight G3
Hi There.
Anyone face problem in the channel mapping for Futaba 6EXA with RealFlight G3?
I have a problem on my rudder control that does not respond?
Anyone have a solution for this?
Please help.
Thanks.Fix Wing
[SIZE="1"][SIZE="2"]SuperSonic - Status : Operation
Cap232 EP - Status : In Hangar
Beaver - Status : Off Line
SkyHawk - In Hangar
Sky Walker - Operation
P51-D : moving into Assembly line
Heli
Belt CP - Status : Operation and modification stage
Belt CP - Status : Display
Mini Titan - Status : Operation
Copter X - In HangarComment
Comment