Is this setup ok?

[Ken85]

hi im try this setup on my glider

MOTOR
RPM/V: 1100Kv
Max Watt : 312W
Max Current : 28A
Weight : 78g
Stator Dimensions : 28 x 12 mm

ESC
turnigy plush 40amp

prop
10*8 folding prop

battery
2200mah 11.1v lipo

coz when i full throttle for 30 sec, the motor is very hot

[Ken85]

i mean the motor is very hot till it burns the plywood i use to reinforce the motor mount...

[LittleGiant]

What's the size of your glider?

If it gets so hot then it is not right.

[Ken85]

its a phoenix 2000 wif 2m wing span

[jerry97]

did u go sengkang field yeserday? are u the one with fbts?

[Ken85]

nope i was there today...

[F-16]

hi im try this setup on my glider

MOTOR
RPM/V: 1100Kv
Max Watt : 312W
Max Current : 28A
Weight : 78g
Stator Dimensions : 28 x 12 mm

ESC
turnigy plush 40amp

prop
10*8 folding prop

battery
2200mah 11.1v lipo

coz when i full throttle for 30 sec, the motor is very hot

Hi Bro,

Your setup is not ok..

To be able to use the same Prop Size on the same KV, your motor should be 35mm > 450watts, I suppose you are using a 28mm outrunner now, then you should prop down to 9 x 8 to save your motor from over heating.

[Ken85]

Hi Bro,

Your setup is not ok..

To be able to use the same Prop Size on the same KV, your motor should be 35mm > 450watts, I suppose you are using a 28mm outrunner now, then you should prop down to 9 x 8 to save your motor from over heating.

how about changing to 9 x 5 prop? izzit ok? how bout the esc?

[F-16]

9 x 5 prop runs cooler on the same motor but you get lesser thrust, 40 amp Hobbywing or Turnigy should be ok as the burst current is 55amp.

[Ken85]

ok thnks

[jerry97]

got meh i go early early one i 7 plus ther already

[Ken85]

got meh i go early early one i 7 plus ther already

im flying a glider... malay guy

[f1rst king]

Looking for old Servo

Hi guys,

Im looking for a replacement servo 9g.
Anyone out there with their old servo to spare.

I believe there is alot of old servo out there, wonder how to appeal for one.

thks