help needed : programming of Hacker Speed Controller X-70-SB-Pro

[rt9]

hi ..

I just bought a Hacker Speed Controller X-70-SB-Pro from here..
Need help to set it to Acceleration high, i need it for plane..

the ESC is defaulted with acceleration to suit Heli ; when i throttle the speed started very slowly.
I downloaded the hacker programming procedure pdf and follow the instruction to enter the programming mode.

"Program mode:
With throttle stick at full power, connect the battery and wait for 5 sec. Program mode is entered when you hear two low tones and two high tones. _ _ - - "

But i cant seem to get into the program mode. i dont hear the two low tones and two high tones.
but if i put the throttle stick from full to off, i hear the normal tu tu tu , te tae.

Any Hacker user here can advise me?

Can this ESC use for plane ?

have been searching the net , but cant find any good info that can help..


thanks!

[chiadennis]

when i throttle the speed started very slowly.

Which mean to say you can arm the esc just that it's on soft start due to heli mode, right?

Check to see if your upper limit end points are set to 100%? Your full throttle maybe partial and the esc not reading the max limit.

http://www.hacker-motor.com/images/X-Pro-rev3-0607Englisch.pdf

[rt9]

Which mean to say you can arm the esc just that it's on soft start due to heli mode, right?

Check to see if your upper limit end points are set to 100%? Your full throttle maybe partial and the esc not reading the max limit.

http://www.hacker-motor.com/images/X...07Englisch.pdf

Yes. can arm the ESC just that its on the soft start , i guess is heli mode (I am not a heli flyer thou :p)

Throttle end points should be 100%.
let me confirm when i am back home later.

Thanks for the great hint !
maybe you are right that the ESC not reading the max limit, thus didnt enter the program mode..
Why didnt i think of that? :p
Also let me check out this possibility.

Thanks for the doc.. i have this as well ;)

Appreciates ..

[rt9]

Yes. can arm the ESC just that its on the soft start , i guess is heli mode (I am not a heli flyer thou :p)

Throttle end points should be 100%.
let me confirm when i am back home later.

Thanks for the great hint !
maybe you are right that the ESC not reading the max limit, thus didnt enter the program mode..
Why didnt i think of that? :p
Also let me check out this possibility.

Thanks for the doc.. i have this as well ;)

Appreciates ..

home and checked already..
use the stick monitor while trying the sequence..
the stick end point is100%
but still fail to enter the program mode.

swap the ESC to a hobbywing and the same Tx/Rx setup can enter program mode.

anymore help?
if not i have to put up for sale .to heli users for better use..

Thanks!

[chiadennis]

Hmm strange...

Are you using Futaba radio?

This is in the troubleshooting guide

Switch “ON” the transmitter and check the throttle channel settings are +/-100% (for computer radios). For Futaba Radios program the “Servo Reverse” function on the throttle channel. Set the throttle to “closed” or brake position

I don't understand "closed or brake position?"

[rt9]

:p i am using a Sanwa radio ..

Really appreciate your help Dennis ;)

I went to NTC just now which also sell the same ESC.
She ask me to buy a USB programmer..
but she dun have la. ask me to get from next door :p

any kind bro here have this Hacker USB programmer?
can give me a helping hand? ;)

@Dennis, are you at PFW?
maybe i drop by one day and let you have brain crack on this? if it is not taking up your time :p
maybe can also borrow your radio to try? :P:P

[chiadennis]

:p i am using a Sanwa radio ..

Really appreciate your help Dennis ;)

I went to NTC just now which also sell the same ESC.
She ask me to buy a USB programmer..
but she dun have la. ask me to get from next door :p

any kind bro here have this Hacker USB programmer?
can give me a helping hand? ;)

@Dennis, are you at PFW?
maybe i drop by one day and let you have brain crack on this? if it is not taking up your time :p
maybe can also borrow your radio to try? :P:P

Sure most happy to help.

[rt9]

one last try..

any kind bro have the a hacker USB programmer to help me?

before i put this up for sale..

such a pity to lose this..