T E A M
any bro can help me? erm gyro's is Operating Voltage: 4.5-6.0V, and the servo's is Operating Voltage: 4.8V must i put a regulator at the connection in between the gyro and servo? and the v of the reg must be 4.8? tks
-
selling items cause upgrading my fleet.
this is my hp no.96 19 17 78 sms me if u wtb anything or if u have any Qn.
1.TREX500(SUNDAY FLYER)(turnigy vbar) waiting to madien.
2.TREX600N (3D MACHINE)(sk360 with spartan 760) maidened on 2jan 2011
3.RAPTOR 90SE(F3C)
4.BLADE MCX(LIVING ROOM FUN) sponsored by bro spykerdelia !!
PILOT DK Yong(De Kai)FUEL USING:OF COURSE NIROMAGIC LA !
Hmm... whats next? :x
sigpic -
Your voltage regulator adjustable? What the voltage that you are putting into the rx?
Set to somewhere between 5.0v to 5.4v will be ok. Some people have burnt up the servo with 5.5v-5.6v. I ran it on the 5.6v default of the jive bec and it was fine.
If you want to use 6v to the rx, you can put the stepdown between the gyro and rx or the rudder servo and gyro.
sigpic -
bro i am using the 6v to rx so can i use a 5.1v reg in between the gyro and servo?tksOriginally posted by baby_zyklon View Postselling items cause upgrading my fleet.
this is my hp no.96 19 17 78 sms me if u wtb anything or if u have any Qn.
1.TREX500(SUNDAY FLYER)(turnigy vbar) waiting to madien.
2.TREX600N (3D MACHINE)(sk360 with spartan 760) maidened on 2jan 2011
3.RAPTOR 90SE(F3C)
4.BLADE MCX(LIVING ROOM FUN) sponsored by bro spykerdelia !!
PILOT DK Yong(De Kai)FUEL USING:OF COURSE NIROMAGIC LA !
Hmm... whats next? :x
sigpicComment
Comment