How to connect LMT motor

[fleek]

Hi all,

Just collected my LMT 1020/17 motor from the post office today. However, the motor comes with 3 blue wires and without any markings. How to connect the LMT motor to the ESC? How do I determine the black, red and blue connections?

[Adrianli]

Check with the maker.

[HZM]

I wasnt sure if LMT is some kind of special brushless .....

But for all brushless I use, I just plug in the 3 wire from my ESC to the 3 wire on the motor. try spooling up slowly.

If it is rotating in the wrong direction, just switch any 2 wire will get the motor rotating in the opposite direction.

Cheers

Mike

[PhiBeR]

I wasnt sure if LMT is some kind of special brushless .....

But for all brushless I use, I just plug in the 3 wire from my ESC to the 3 wire on the motor. try spooling up slowly.

If it is rotating in the wrong direction, just switch any 2 wire will get the motor rotating in the opposite direction.

Cheers

Mike

Yups, do juz that!
Most BL motor/esc are sensorless, so u can use any wire combination.
Then check rotor direction, if wrong then juz swap any 2 wires..

[YZY]

LMT= lehner isn't it???

[fleek]

LMT= lehner isn't it???

Yep, LMT is Lehner Motor Technology

[Mathieu]

You're right ZY, Lehner Motoren Technik..you want one right...

[YZY]