9xII Mixing issues

[lu wei yao]

Hey guys,

This is directed to all those who know their 9xII, DSX9 etc well.

I need to do the following:
Run 2 throttle servos which require exactly the same amt. of travel.
Throttle servo 1 is plugged into Throt servo output.
Throttle servo 2 is plugged into Aux 2 servo output.

I have Engaged prog Mix to move both servos together, BUT, both servos have diff travel.

The slave servo(Aux2), seems to have only 1/2 the travel.
I have played around with the ATV, subtrims etc. Still cant make them equal.

Need help asap.

Thanx!

[bell206]

Need 2 prog mixes

On 1st, set to -100, -100, 0. On the 2nd, set to -100, 0, 0.

Hope it helps!

[X34]

9x11 has a preprogrammed multi engine setup.

[lu wei yao]

Hey thanx guys.

Managed to bypass that, system works.

Thanx!

[abner]

My 0.000000001 cent worth... why in the 1st place u dont use a "Y" connector... lazy way of doing, but i guess it should work as fine....

[lu wei yao]

My 0.000000001 cent worth... why in the 1st place u dont use a "Y" connector... lazy way of doing, but i guess it should work as fine....

That's what i did.
And you saw it work.

Thanx!