Announcement

Collapse
No announcement yet.

Trex 300x help for throttle range calibration

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Trex 300x help for throttle range calibration

    When I join the throttle cable and turn on power I beep beep sound which does not stop. After that none of the sticks works. I think it failed to calibrate the position or is there any errors. Can any one help?

    #2
    Need to set your curve to normal. Make sure if your throttle stick is all the way down, the Tx throttle output should be 0%, and if the stick is up, the output should be 100%.

    Comment

    Working...
    X