My half finished rc paraglider project. Hope to finish it up as soon as possible. Any comments guys ???
Announcement
Collapse
No announcement yet.
My para project
Collapse
X
-
Today redo the front skid as it look flimsy and replace it with a bent aluminium rod, look sturdier and better now. Mounted also a batt indicator and tested the servo movement. Only thing missing now is the receiver and then it's good to go...
Yes good of you to point out the wrong prop direction. Will change it, thanks...
Comment
-
Originally posted by Ghostfit View Post1,000 points for safety !!! ...I like it !!!
Comment
-
Hi guys, i finsihed my project already, however i ran in one major problem.
I am using my heli Tx (T7CHP) and a 7 channels Rx on it.
I got a strange feeling, my setting is not correct but just can't figure out where is wrong. So i needed some help here.
The thing is this:
My flybar servo (aileron) is connected to channel 1 and my esc on channel 3.
But when i moved the throttle stick, the flybar moves as well. And even more strange is when i move the elevator stick, the flybar moves as well.
Any idea where i went wrong ??? Please help and thanks...
Comment
-
Hi guys, you were great, why didn't i think about that. Guess i have been playing heli far too long already and forgotten my plane basics.
I have change it to ACRO mode. Works correct and great now.
Thanks alot and now going off for the first field test.
Another question if anyone of you have play rc para, as this is only my first build. Do you need a lot of throw on the flybar rod to turn the chute?
I am not too sure whether i have sufficient throw as i don't want to land up in a situation where it is up in the air and i can't control the right or left turn.
Any advice ??? Thanks alot again...
Comment
-
Originally posted by leonmike View PostHi guys, you were great, why didn't i think about that. Guess i have been playing heli far too long already and forgotten my plane basics.
I have change it to ACRO mode. Works correct and great now.
Thanks alot and now going off for the first field test.
Another question if anyone of you have play rc para, as this is only my first build. Do you need a lot of throw on the flybar rod to turn the chute?
I am not too sure whether i have sufficient throw as i don't want to land up in a situation where it is up in the air and i can't control the right or left turn.
Any advice ??? Thanks alot again...
Hi bro. Eleron u can set up to max
for my eleron set D/R 80% & max[SIGPIC]
Comment
Comment