Can I using Esky transmiter EK2-0404 72MHz on the RC kite ?

[homstuas]

Recently I bought a rc kite from China, found out the receiver pcb has burn and it running 27MHz crystal. Can I switch my Esky Lama V4 RX and TX on the RC Kite ? My Esky is RTF 72MHz 4 Channel. I have attach some picture on it. Profestional please give advice and help !!!!

Transmitter model : EK2-0404 72MHz
Receiver model : E_Sky EK2-0705B 4-in-1 Controller for Lama V3 V4 (72Mhz)


Thanks,
Alan

[xeqouz]

Recently I bought a rc kite from China, found out the receiver pcb has burn and it running 27MHz crystal. Can I switch my Esky Lama V4 RX and TX on the RC Kite ? My Esky is RTF 72MHz 4 Channel. I have attach some picture on it. Profestional please give advice and help !!!!

Transmitter model : EK2-0404 72MHz
Receiver model : E_Sky EK2-0705B 4-in-1 Controller for Lama V3 V4 (72Mhz)


Thanks,
Alan

Not suitable bro.

For the kite, u need a programmable tx with elevon mixing capability.

The rx should be able to use but u'll be only relying on 1 of the 2 motor output. I suggess u not to try it cos u may end up burning ur 4-in-1 which is quite expensive. But anyway, if u've got urself a programmable tx ( i supposed it'll come with a rx), u dun need to use e 4-in-1 liao..

[homstuas]

So, can I using my current TX and buy a new RX and match it ?

[Superior1]

So, can I using my current TX and buy a new RX and match it ?

Bro,
It will not match...
How can 72Mhz match with 27Mhz