Mask

[astroboyy]

Hi would like to know what is a good mask to get for use when sanding balsa or foam. Any advise thanks.

Got one from hardware shop but not too good as it is not fully sealed off and so balsa dust still gets in.

[blurchaoz]

erm, maybe the hard cover mask by 3M. think it might be queit good. never try it before but just giving some suggestion.

[Mad Armour]

Hi would like to know what is a good mask to get for use when sanding balsa or foam. Any advise thanks.

Got one from hardware shop but not too good as it is not fully sealed off and so balsa dust still gets in.

You can get something similar to this from any medical supply shops or pharmacy. Most important is to get the correct size and to shape the metal bar over your nasal bridge for a tight fit. Do not be smart and get N95 hor....

If you don't know where to begin, can try

Progress Healthcare Pte Ltd
345 Jln Besar Singapore 208987
Tel: 6297 5955

PS. I'm have no commercial interest in Progress.

[teddy]

hi, i have one box of 3M n95 mask bought during sars, need them? let me know.

[Mad Armour]

N95 is not suitable for hobby work.

[Adrianli]

Get those Fire fighting or Chemical attack face mask with replaceable cannister.

Draager is a good brand.

3M might also have.


Definately air tight!!! Tried b4 during NS days.

[Mad Armour]

Get those Fire fighting or Chemical attack face mask with replaceable cannister.

Draager is a good brand.

3M might also have.


Definately air tight!!! Tried b4 during NS days.

Looks like overkill!

[nic]

Get those Fire fighting or Chemical attack face mask with replaceable cannister.

why not just use a scuba diving air tank?