AQ - 600 quadcopter

[cyberiarvo]

Hi guys...i need some help.. Im planning to built a AQ-600 quad. Here is the list of parts that im planning to buy.

1. AQ-600 frame
2. HK KK2.0 board
3. Turnigy plush 30amp ESC X4
4. 2200mah 3S batt
5. 4pcs 9x4.7 prop
6. 4pcs Motor ... Turnigy 5017 620kv

Im still thinkin if the motor is good enough. Any Suggestion? And am i still missing something or things that i still need to add?

Thnks!

[wireframan]

Hi guys...i need some help.. Im planning to built a AQ-600 quad. Here is the list of parts that im planning to buy.

1. AQ-600 frame
2. HK KK2.0 board
3. Turnigy plush 30amp ESC X4
4. 2200mah 3S batt
5. 4pcs 9x4.7 prop
6. 4pcs Motor ... Turnigy 5017 620kv

Im still thinkin if the motor is good enough. Any Suggestion? And am i still missing something or things that i still need to add?

Thnks!

4 and 5 are a bit small for your motor. My suggestion is to get a 3000-5000 4s lipo and APC 14x4.7 prop

7. Power distribution Board
8. Lipo Low voltage buzzer
9. Led (optional)
10. Camera Gimbal (optional)
11. GoPro (optional)

Good Luck and enjoy

[cyberiarvo]

Thnks!

I mis number 7......

Im still thinking if this motor is good for this built or is it overkill

[wireframan]

Thnks!

I mis number 7......

Im still thinking if this motor is good for this built or is it overkill

If you want to carry dslr that motor can do the job. If not, then it's overkill. 800-1000kv is enough

[cyberiarvo]

I see. im planning to put a gopro only so ill go with 800-1000kv

Thnks again Wireframan .... Btw what camera gimbal is good for gopro?