Trex 450XL problem

[headspeed]

superHornet, thanks. I reinstalled the servo horn to near the centre. I try put all links with the 'A' facing outward but not all can be done this way. this is because of the 360deg turn thing. I have checked the diameter of the linkage hood with the vernia caliber. Diameter is almost the same.
BTW the problem is solved. The root cause is the 20deg thing.

Will try and fly it.

Thank again.

[Super-Hornet]

If u can't replace or set all to 'A' facing out... never mind. Next when u replace it, remember to set 'A' facing outward. It is ok to out by a bit due to 360Degree. So long as u get good tracking throughout is more than enough.

Now... GO OUT AND FLY!!

SH

[darth_hell]

hi...

i tink ur linkage rods r high... wats e length of ur linkage rods??? did u follow the align menu??? try shorthening e rods oso while u follow e other guys comments...
actually a lot of stuffs will lead 2 minor problems... u have 2 trial n error... try all the reccomendations tat v all give u n wrk ur way from there...