Announcement

Collapse
No announcement yet.

Need help!!! My Trex500 jitters while in flight

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need help!!! My Trex500 jitters while in flight

    Need assistance in setting up heli!!! Unable to get the rigjt head speed!!!

    #2
    Originally posted by Karambit View Post
    Need assistance in setting up heli!!! Unable to get the rigjt head speed!!!
    Can provide more information? What setup are you using? Is it Fbl head?
    Hanger
    Hirobo XRB SR Lama
    Hirobo Quark SRB
    Hirobo Quark SRB SG
    Eflite Blade SR (For Display)
    Blade450 3D
    MSH Mini Protos (SOLD)
    COMPASS 6HV (Combat Fit PES A)

    Plane
    Dynam PBY Catalina 1.4m
    FMS J3 Cub 1.4m
    Artech F14 Tomcat EDF
    HK FLYJET EDF
    Artech Skyfun
    Dynam P51D Mustang
    Parkzone P51

    Tx:
    Futaba 6J 2.4GHz(SOLD)
    Spektrum DX6i
    DX8
    Futaba 9CAP

    Comment


      #3
      Originally posted by elmosan View Post
      Can provide more information? What setup are you using? Is it Fbl head?
      Its FBL using DFC head... Beast X gyro

      Comment


        #4
        Hi, if u could elaborate more about what happen to you heli during hover or startup? there might be lot of vibration like blade tracking etc. what is your setting on esc that u can get the headspeed etc.

        Comment


          #5
          Originally posted by vintcs View Post
          Hi, if u could elaborate more about what happen to you heli during hover or startup? there might be lot of vibration like blade tracking etc. what is your setting on esc that u can get the headspeed etc.
          I'm new in this hobby.. Bought the heli 2nd hand convert to FBL. send to Rotor for setup still hv the jitters whilst hovering.. Headspeed vrry slow..esc set up not very sure coz i'm novice.. Hp 90669654...like giving up

          Comment


            #6
            where you stay? maybe you can go to thr funfly group near your place and im sure the guys there will assist u.

            Comment


              #7
              Originally posted by Karambit View Post
              I'm new in this hobby.. Bought the heli 2nd hand convert to FBL. send to Rotor for setup still hv the jitters whilst hovering.. Headspeed vrry slow..esc set up not very sure coz i'm novice.. Hp 90669654...like giving up
              For FBL system, headspeed cannot be too slow else will likely to cause jitters. Try calibrate yr throttle to let the esc know the max & min throttle value 1st. I'm using Hobbywing 60A ESC and stock atom motor on a Atom 500 heli, my throttle curve for normal is 0,80,80,80,80 & 85,85,85,85,85 for idleup, I enable govenor on my ESC. Without govenor enabled, u can try 0,30,60,80,85 for normal then slowly increase or decrease the 3rd, 4th & 5th value and see if the jitter goes alway. Also make sure the driving freq in beastx for yr cyclic & tail servo is set to the correct speed.
              Heli
              1 - Flip360 quad with APM 2.6.

              Plane
              1 - Durafly P-51 Mustang - Nice scale details and stable in the air
              Tx
              Frsky Taranis X9D

              Comment


                #8
                Originally posted by vintcs View Post
                where you stay? maybe you can go to thr funfly group near your place and im sure the guys there will assist u.
                +1

                Heli is addictive and full of poison bro. Dont give up!

                Comment

                Working...
                X