-
450 PRO - Phoenixtech Scorpion 2221-8, Castle Creations Phoenix 35, Hitec HS65HB cyclic, Futaba 9650 tail, (hanger)
MA Furion 6 - Savox 5055 560KV, Castle Creations ICE 80HV, Turnigy 959MG cyclic, HK47110MG tail, Castle Creations BEC pro, BeastX
MA Fury55 - OS55HZ + Outrage EVO55 pipe, HS5625MG cyclic, Spartan + HK47110MG, Align 2 in 1, Align Governor.
Kasama - Savox 5065 550KV, Castle Creations Phoenix 85HV, HK47110MB tail, Hitec 7985MG cyclic, BeastX
-
Just updated tmr test flight.
More parameter choices now. not sure what all of it does.
Please be cautioned that updating will erase ALL setting data.
you have to setup again from the start.
Cheers!
450 PRO - Phoenixtech Scorpion 2221-8, Castle Creations Phoenix 35, Hitec HS65HB cyclic, Futaba 9650 tail, (hanger)
MA Furion 6 - Savox 5055 560KV, Castle Creations ICE 80HV, Turnigy 959MG cyclic, HK47110MG tail, Castle Creations BEC pro, BeastX
MA Fury55 - OS55HZ + Outrage EVO55 pipe, HS5625MG cyclic, Spartan + HK47110MG, Align 2 in 1, Align Governor.
Kasama - Savox 5065 550KV, Castle Creations Phoenix 85HV, HK47110MB tail, Hitec 7985MG cyclic, BeastX
-
I've tried, tail holding more solid, have parameter to set it to feel more flybar like. Cyclic feel more lockin & pitch feels more responsive. I can't do 3d yet so only normal flying. I like the v3.
Heli
1 - Flip360 quad with APM 2.6.
Plane
1 - Durafly P-51 Mustang - Nice scale details and stable in the air
Tx
Frsky Taranis X9DComment
-
hassle>improvement?
hassle
Dial settings and gyro gain need to change significantly?
sigpicComment
T E A M
| |
| a p l a c e RC&E HOBBYISTS m e e t | |
- If this is your first visit, be sure to check out the Rules and Help. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Comment