T E A M
Its official,
the new align heli is called the Trex 600E pro
and the new 3GX
Good stuff!
the new align heli is called the Trex 600E pro
and the new 3GX
Good stuff!
-
450 PRO - Phoenixtech Scorpion 2221-8, Castle Creations Phoenix 35, Hitec HS65HB cyclic, Futaba 9650 tail, (hanger)
MA Furion 6 - Savox 5055 560KV, Castle Creations ICE 80HV, Turnigy 959MG cyclic, HK47110MG tail, Castle Creations BEC pro, BeastX
MA Fury55 - OS55HZ + Outrage EVO55 pipe, HS5625MG cyclic, Spartan + HK47110MG, Align 2 in 1, Align Governor.
Kasama - Savox 5065 550KV, Castle Creations Phoenix 85HV, HK47110MB tail, Hitec 7985MG cyclic, BeastX
-
comes with a cc ice hv??For sale
trex 700/ 12mm main shaft swash leveller. carbon type $22 only new -
Yap! CC80HV including !Originally posted by johndyl View Post
[B][I]Tx[/I][/B]: [B]Futaba 10CHP on 2.4G,29&35Mhz[/B]
------------------------------
[B][I]Heli on service[/I]:[/B]
Trex700N[B][COLOR="Orange"](BeastX FBL)[/COLOR][/B]
TT X50[B][COLOR="Orange"](BeastX FBL)[/COLOR][/B]
MSH Protos [B][COLOR="Orange"](BeastX FBL)[/COLOR][/B]
HK480pro [B][COLOR="Orange"](Tarot ZYX FBL)[/COLOR][/B]Comment
-
450 PRO - Phoenixtech Scorpion 2221-8, Castle Creations Phoenix 35, Hitec HS65HB cyclic, Futaba 9650 tail, (hanger)
MA Furion 6 - Savox 5055 560KV, Castle Creations ICE 80HV, Turnigy 959MG cyclic, HK47110MG tail, Castle Creations BEC pro, BeastX
MA Fury55 - OS55HZ + Outrage EVO55 pipe, HS5625MG cyclic, Spartan + HK47110MG, Align 2 in 1, Align Governor.
Kasama - Savox 5065 550KV, Castle Creations Phoenix 85HV, HK47110MB tail, Hitec 7985MG cyclic, BeastX
Comment
-
looking through the new 600 pro..
Pros:
- New programmable head
- Nylon bushing for tail pitch slider
- Nice plastic mounting for Servos.
- Mod1 Bevel Gear.
Cons:
- Higher part count than 600E
- Looks like AUW will be higher
overall, i am not too overly excited about the new 600E Pro.
not something i would jump over if my 600E is already flying good.
CHEERS!
450 PRO - Phoenixtech Scorpion 2221-8, Castle Creations Phoenix 35, Hitec HS65HB cyclic, Futaba 9650 tail, (hanger)
MA Furion 6 - Savox 5055 560KV, Castle Creations ICE 80HV, Turnigy 959MG cyclic, HK47110MG tail, Castle Creations BEC pro, BeastX
MA Fury55 - OS55HZ + Outrage EVO55 pipe, HS5625MG cyclic, Spartan + HK47110MG, Align 2 in 1, Align Governor.
Kasama - Savox 5065 550KV, Castle Creations Phoenix 85HV, HK47110MB tail, Hitec 7985MG cyclic, BeastX
Comment
-
From cncrcgroups.com forum for convenience. more on the original site.
450 PRO - Phoenixtech Scorpion 2221-8, Castle Creations Phoenix 35, Hitec HS65HB cyclic, Futaba 9650 tail, (hanger)
MA Furion 6 - Savox 5055 560KV, Castle Creations ICE 80HV, Turnigy 959MG cyclic, HK47110MG tail, Castle Creations BEC pro, BeastX
MA Fury55 - OS55HZ + Outrage EVO55 pipe, HS5625MG cyclic, Spartan + HK47110MG, Align 2 in 1, Align Governor.
Kasama - Savox 5065 550KV, Castle Creations Phoenix 85HV, HK47110MB tail, Hitec 7985MG cyclic, BeastX
Comment
-
Hi Stickman, thanks for sharing. I was just doing some maintenance on my blade400 last nite when I realised that there is some uncanny resemblance of the rotor head. Will try to get some pics for comparison.Heli-ADDICTION:
Mikado Logos, RaptorG4s, X7F, 600ESP...
JUST one more Logo...for the month.
Comment
-
Heli-ADDICTION:
Mikado Logos, RaptorG4s, X7F, 600ESP...
JUST one more Logo...for the month.Comment
-
Bro... there are only a few flybar rotohead configurations out there... There are bound to have different maunfactures which uses similar designs...
This design is also common to JR Vibe, Protos, Srimok...Comment
Comment