Help , IM stuck with Walkera 4g6s

[superakan]

Recently brought Walkera 4g6s 2nd hand but until now still having problem to fly it. Heli keep on turning circle on the ground. Not sure if any parts is broken. Can any kind people out there help me out ?

[kiply]

What is the radio model you are using? 2801Pro? Your gyro or tail servo may be in reverse.

[superakan]

What is the radio model you are using? 2801Pro? Your gyro or tail servo may be in reverse.

Yes, using Walkera 2801 Pro, but somehow on the radio only able to use WK-2601 to link with this heli.

[superakan]

Can anyone there help me to tune my 4g6s heli ?

[kiply]

2601 mode is correct, you cannot use 2801 mode with 4G6S. Check if your rudder servo is reversed in your radio.

[superakan]

yes, rudder servo has been switch to normal mode, but still hard to get it fly straight up, heli always trying to spin , although not as much as before after i switch its rudder servo back.

[remotemadness]

Hi bro,

Why don't you try Helifeak.. They have a lot of people there that's quite familiar with this heli..

I don't understand why it can't bind to the Pro 2801 transmitter..

I'm sure you can find someone else setting there to help trouble shoot your problem..

My suggestion is to use someone's "tried successful" setting and start from there..

Hope you have it sorted out,

Cheers
quest

[nic]

Since you got it used, double check the rx type, is it still the original rx that came with the heli?

Is this your first heli?

I dont own a 4g6s, but i do have a 4g6. I bind using 2801.
4g6 is not a begginer heli, and is tough to fly.

Tail will not hold if battery is weak. - is your batt still good enough to supply enough current?

It will not hold if the tail is not setup properly too. There are lots of mechanical factors that will result in this.

Best is bring it to a funfly, look for people that flies 6ch heli to help you. Just do bear in mind that this little heli is very twitchy, some might be uncomfortable to help tweak a heli this size even though they fly the much larger cousins.

[superakan]

Since you got it used, double check the rx type, is it still the original rx that came with the heli?

Is this your first heli?

I dont own a 4g6s, but i do have a 4g6. I bind using 2801.
4g6 is not a begginer heli, and is tough to fly.

Tail will not hold if battery is weak. - is your batt still good enough to supply enough current?

It will not hold if the tail is not setup properly too. There are lots of mechanical factors that will result in this.

Best is bring it to a funfly, look for people that flies 6ch heli to help you. Just do bear in mind that this little heli is very twitchy, some might be uncomfortable to help tweak a heli this size even though they fly the much larger cousins.

Oh yes, for 4g6s , it can only bind with 2601. I suspect that zeroing is out... Anybody there have any idea on how to zero Walkera 4g6s tail ?