Need help

[bemyself]

Hi all friendly fliers,
I'm a newbie and need help. I bought a 90 size heli from a very friendly bro here with all electronics. But the problem is that it's still not install yet. Actually by right, should have gone to this bro who sold the heli to ask for help but recently I believe he's very busy. so I prefer not to disturb him. Actually my problems are just how to hook up the electronics. The heli comes with:
1. JR receiver 921 ( radio is a 9 DSX )
2. Align regulator
3. Aerosmith Governor w sensor
4. battery indicator
5. 7.4 lipo battery
6. Spartan Ds 760 gyro
7. all the required servos.
Can any kind bros advise how to plug all these into the appropriate slots? I know some will advise me to go down to any flying site for assistance but the problem is I'm not in S'pore. Thanks for reading and have a nice day.
Regards,
Bemyself

[frazen]

90 sized?

i think it will still be better to go down any funfly anywhere in the world...

dun kid with a 90 sized heli... it will kill and chop off anything with its blades..

[hallobaby]

Going down to a FF to fix your heli will be a living hell.
I believe you should state your location here.
I believe someone living nearby can help.

90 size for a newbie is possible.. But must bear in mind for all safety issue..

[bemyself]

I would like to thank frazen, hallobaby and a few kind bros here who pm'ed regarding the safety issues on flying a 90 size heli. Thanks once again.
The reason I'm going for a 90 size heli is because of my poor eyesight ( going 49 next year )
I'd been flying heli for about 5 years ( just boring the sky with circle and figure 8's flying ) I'd stopped for a while and now intend to take up this hobby again. I used to fly in Thailand where most of the time I'm spoilt with people setting up the heli for me. Because of the nature of my work, I can't enjoy the wonderful part of learning how to set up a heli. Thus till now, I'm considered a noobs in heli setup. What i need is just a simple instruction on which connector should go to which channels. I do have a thai friend who can help me with the setup but he himself is also confused over the governor, sensor and regulator. Once I have the electronic hook up, I believe the rest can be done by my friend. Moreover, I would also like to learn how to set up and being a S'porean, the language that we used will easier for me to understand.
Apologise for the lengthy post and really appreciate everyone's concern.
Regards,
Bemyself

[bemyself]

Hi Hallobaby,
I miss out my location. I'm presently working in Bien Hoa City, Vietnam.
regards,
Bemyself

[mahathyr]

what about downloading manuals??..for jr,align..etc...maybe that will be good to start with

[HBT]

school holiday lai liao lol