Need Help in setting eCCPM on a 9X

[haidee]

Im currently setting up my Trex for eCCPM on a 9X( 1 Servo Front , 2 servo Rear )
Can I get any help from any experts out there in regards to seting up with my 9X.

I,ve got the settings in my 9X for 120Deg, however its on CCPM for 2 Servo Front and 1 Servo Back, manage to play about with it but notice that the pitch moves in the opposite direction, had done a reverse on the pitch and the throttle, am I doing it right?which channel is right for the Aileron, Pitch and Elevator ? Please guys advice. Many Thanks In Advance

[alan_gbk]

It shouldn't be a problem. Try to reserve aileron and elevator. I tried before to set it at Futaba 9CHP with Swashplate type SR-3.

[pilot_bear]

hi,
not an expert, new also.
i am using 9chp, same brand some maybe same setting.

ch 1 = aileron
ch 2 = elevator (pitch)
ch 6 = pitch (elevator)

if you are using 120 config, then your model type will be "SR-3" , its does not matter
if the 2 servo is front or back, it will still work fine.
there is another 120 config where ths aileron servo is position at either 3 o'clock or
9 o'clock position "SN-3" from top view.

pitch and throttle are 2 diff ch, you need not reverse both together.
a bit of try and error will get you places.
but best if help is available. join funfly.

[X34]

Im currently setting up my Trex for eCCPM on a 9X( 1 Servo Front , 2 servo Rear )
Can I get any help from any experts out there in regards to seting up with my 9X.

I,ve got the settings in my 9X for 120Deg, however its on CCPM for 2 Servo Front and 1 Servo Back, manage to play about with it but notice that the pitch moves in the opposite direction, had done a reverse on the pitch and the throttle, am I doing it right?which channel is right for the Aileron, Pitch and Elevator ? Please guys advice. Many Thanks In Advance

Goto the swash mix program and reverse the pitch

[haidee]

eCCPM Setup on 9X

Thanks for the Help Guys, Still cant figure out what is not right when i reverse the pitch other servos when on different direction, anyway heres the setup ive got on, hope some one can shine some light .Thanks

Tx setup on 9x:

R900S Receiver:
CH2: Aileron ( Right Servo)
CH3: Elevator ( Front Servo)
CH6: Pitch (Left Servo)

Switch Directios:

Elevator (Normal)
Pitch (Normal)
Aileron (Reverse)

Swash Mix:

Aile: 80%
Elev:80%
Pitch:112%


Thanks Again Guys.

[haidee]

eCCPM Setup on 9X

Thanks for the Help Guys, Still cant figure out what is not right when i reverse the pitch other servos when on different direction, anyway heres the setup ive got on and a picture attachement, hope some one can shine some light .Thanks

Tx setup on 9x:

R900S Receiver:
CH2: Aileron ( Right Servo)
CH3: Elevator ( Front Servo)
CH6: Pitch (Left Servo)

Switch Directios:

Elevator (Normal)
Pitch (Normal)
Aileron (Reverse)

Swash Mix:

Aile: 80%
Elev:80%
Pitch:112%


Thanks Again Guys.

[ChRiS]

wan to noe something...
if get a V2 then can convert to CCPM... but then need to buy new swashplate or change in the TX?

[ChRiS]

change as in the swashplate mode???

[alan_gbk]

U can either buy a new CCPM swashplate or mod the existing swashplate.
http://www.cuttingedgecnc.com/trex.htm#CCPM'ing%20the%20T-Rex%20(1-15-05)

[haidee]

eCCPM on 9X Tx Setup

Ive Managed to sort the pitch and throttle to be at the ideal normal position,
However the only issue now is the elevator is in the opposite direction,tried reversing the Elev causing all the servos to be in chaios. Elev seems to turn to pitch to....what can be wrong?Pls Advice

[X34]

set swash mix to -??
aileron normal
elev -reverse
pitch -reverse

[haidee]

Thanks a Million X34 (James)

Sort the problem out ,Thanks a Million James I owe you one.