need help- R146IP recevier

[MrBig9529]

Hello All.. need your advice please. Where will i connect the power for the receiver as i will be using it for Nitro heli???? as the ff channels were used...

1= Aileron servo
2= elevator
3= trottle
4= Gyro
5= Gyro sensitivity
6/B=Pitch Servo

Any one can help me how will i power up my receiver, where to connect the wire from the batter/regulator?

Thanks in advance...

[johndyl]

Hello All.. need your advice please. Where will i connect the power for the receiver as i will be using it for Nitro heli???? as the ff channels were used...

1= Aileron servo
2= elevator
3= trottle
4= Gyro
5= Gyro sensitivity
6/B=Pitch Servo

Any one can help me how will i power up my receiver, where to connect the wire from the batter/regulator?

Thanks in advance...

if ur gyro gain is only 1 wire, u can plug the red and black wires into the "empty" space

u can also get a Y cable but not too sure if it can take the current(need 22awg or thicker)

or get a rx with more ch

[MrBig9529]

Hi johndyl, thanks for the help.. i just tried it and now working..... :lip i will use this for the mean as i also plan to upgrade to 2.4 G soon...

Cheers!..