Trex600 Nitro - Servos you are using. NO OT!

[HotDogBun]

Good day gentleman,
I am very curious what your servos you are using on your Trex600 Nitro
Pls use the format below to put in your sharing. I hope to keep this thread short and sharp with no OT. Solely for sharing the setup so that others may take reference when they buying servos for their direct CCPM .50 size bird.

Thanks!

Cyclics - **servo**
- **comments**

Rudder - **servo**
- **comments**

Throttle - **servo**
- **comments**

[Ade_Law]

ok im not flying a trex but the knight is a pretty similar model

cyclics

futaba bls351

tail

spartan DS760 with BLS 251

throttle

depends what gov your using, some need a 9254 or similar to work to their best but a rev lock or curtis ATV only needs a futaba 3152

[boo_saa]

bro i am using HS5625MG for cyclic and thro, and BLS251 for tail.

[Ivan M]

Cyclics - **Futaba 9255**
- **comments**

Rudder - **Futaba 9254**
- **comments**

Throttle - **Futaba 3001**
- **comments**

No comments - just ported the electronics over after the K3D crashed yesterday.

[sookainian]

Stratus

Cyclics - Ino-Lab D760MG

Rudder - Futaba BLS251

Throttle - Ino-Lab D660HB

[Parsifal]

No a t-rex, but a vibe 50... Futaba 9451s all round and a bls 251 on the tail. Great so far.

Pars

[edmond22]

Not a Trex but RJX 50

Cyclics - BLS352
- **comments**

Rudder - BLS251 w Spartan
- **comments**

Throttle - 9202 lol (changing soon)
- **comments**

[lu wei yao]

Xtreme 50

Cyclics - JR 8715
- **comments**

Rudder - JR 8900G/ JR 770T
- **comments**

Throttle - JR 8900G
- **comments**

[tucfaz]

Raptor 50

Cyclics - Ino-Lab HD760MG
- **comments**

Rudder - Logictech 6100..
- **comments**

Throttle - GWS Metal Gear Servo.. (Don't know which model)
- **comments**

[edmond22]

Raptor 50

Cyclics - Ino-Lab HD760MG
- **comments**

Rudder - Logictech 6100..
- **comments**

Throttle - GWS Metal Gear Servo.. (Don't know which model)
- **comments**

Lol, looks like we have something in common, we are not too bothered by throttle servo kekee, as long as it works reliably.

[tucfaz]

True. But that's because I was running a GV-1 which which does not require a fast servo.. and this GWS servo used to be my rudder servo on my R30 with a GY240.. the same servo was transferred to pitch again on the R30.. and finally.. throttle on the .50..

Lol, looks like we have something in common, we are not too bothered by throttle servo kekee, as long as it works reliably.

[HotDogBun]

Can you two lovey dovey lovebirds bring your OT elsewhere? Trying to minimise the webspace for this thread

[nexus05]

Trex 600 NSP.

Cyclics - 8717 x 3
- Running on 8v. Super fast metal gear servos. Get it and you never need to change your servos for a long long time.(~0.05s to 0.04s on 8v)

Rudder - GY611+ 9256
- Running at 5.2V.

Throttle - Hyperion HP-DS12GCP
- Running at 5.2V

Running a spektrum VR5203 dual output reg for rudder n throttle.