Where can I purchase Ino Lab servo?

[Radio man]

CONTACT Korean man Nick:White shark
For any enquiry on Beam Helis & Ino-Lab servos.

Hanman International Pte Ltd
2 Jurong East Street 21
#03-157 IMM Building
Singapore 609601
Tel : +65 6564 4704
Fax : +65 6234 4635
Mobile : +65 900 200 21
Email : info@hanman.net

[Radio man]

Hi, may I know where I can fidn the specs of these servos from Korea? Heard quite a number of good comments on them

PRODUCTS - Ino Lab SERVOs
Sizes Model Name
STANDARD 4.8V (sec/60°) 6V (sec/60°) 4.8V (kg.cm) 6V (kg.cm)
HG-D760MG 0.11 0.09 8.30 9.6
HG-D650HB 0.14 0.12 5.5 6.3
HG-D750MG 0.14 0.12 11.20 13.30
HG-650HB 0.19 0.16 3.0 3.6

HG-D660HB NOT AVAILABLE
HG-D750HB NOT AVAILABLE
HG-D650MG NOT AVAILABLE
HG-D660MG NOT AVAILABLE

MICRO 4.8V (sec/60°) 6V (sec/60°) 4.8V (kg.cm) 6V (kg.cm)
HG-D260HB 0.12 0.10 2.0 2.5
HG-250HB 0.16 0.12 2.0 2.6
HG-D250HB 0.16 0.12 2.5 3.0
HG-D260MG 0.16 0.12 2.7 3.2
HG-D250MG 0.21 0.17 4.0 4.7

HG-D255HB NOT AVAILABLE

NANO 4.8V (sec/60°) 4.8V (kg.cm)
HG-D202HB 0.11 1.5
HG-201HB 0.09 0.6
HG-202HB 0.12 1.0
HG-D202MG 0.16 2.0

HG-D201HB AL NOT AVAILABLE
HG-D202HB AL NOT AVAILABLE

RUDDER 4.8V (sec/60°) 6V (sec/60°) 4.8V (kg.cm) 6V (kg.cm)
HG-D251MG 0.15 0.12 4.8 5.6
HG-D261HB 0.07 0.06 2.4 3.0


Legend HG-DxxxHB/MG/HB AL
D: Digital
xxx: Model No.
HB: Carbonated Gear
MG: Metal Gear
HB AL: Carbonated Gear with Aluminum Heat Sink

[CENTER]

[whiteshark]

You may visit http://www.inolabservo.com to find out more.

Where can I purchase Ino Lab servo? Any supplier or retailer selling these servos in Singapore. I'm gonna use it on MSHeli Protos.

[baby_zyklon]

anyone using the 760mg?

How is the centering and deadband under load? Is the metal gear slop minimal like the current crop of metal geared servos?

[khatiban]

hi are there any programmers for the digital servos?

[sookainian]

anyone using the 760mg?

3 x 760MG for cyclic (6v)
1 x 660HB for throttle (6v)