Announcement

Collapse
No announcement yet.

Honey Bee King 2 Problem

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Honey Bee King 2 Problem

    Hi All,

    I just got my Honey Bee 2 recently.i am having a lot of problem with this heli.
    i could not even hover with this.The tail keep turning ard despite the setup i did on tail.on my Transmitter, i turn the top knob to abt 10 o'clock but the tail still turn like crazy.i tried moving the rudder to the right to counter the torque but i need to move the rudder to almost max.Is there anything wrong ?
    SOmeone pls help me!

    #2
    Originally posted by asics64
    Hi All,

    I just got my Honey Bee 2 recently.i am having a lot of problem with this heli.
    i could not even hover with this.The tail keep turning ard despite the setup i did on tail.on my Transmitter, i turn the top knob to abt 10 o'clock but the tail still turn like crazy.i tried moving the rudder to the right to counter the torque but i need to move the rudder to almost max.Is there anything wrong ?
    SOmeone pls help me!
    Try reverse the gyro switch.
    Align TREX 600 N Pro With Skookum 720
    Align TREX 500 With TT GT5 FB
    HK 600 GT With EC 145 Fuselage Flying On Turnigy VBar 600
    sigpic

    Comment


      #3
      Originally posted by asics64
      Hi All,

      I just got my Honey Bee 2 recently.i am having a lot of problem with this heli.
      i could not even hover with this.The tail keep turning ard despite the setup i did on tail.on my Transmitter, i turn the top knob to abt 10 o'clock but the tail still turn like crazy.i tried moving the rudder to the right to counter the torque but i need to move the rudder to almost max.Is there anything wrong ?
      SOmeone pls help me!
      check your belt tension BTW the plastic frame will wear out soon so tension changing will be impossible later on unless you do some mods to the frame
      hope this helps
      «Kira'sHanger™®»:
      HK450MT ( awaiting elecs)

      Comment


        #4
        join a funfly and ask the ppl there to try adjust it for you..
        Trex 450.
        Trex 500.
        9CHP.

        Comment


          #5
          hbk2 tail problem

          Hi, welcome to the sport,

          you need to check the gyro orientation first, after power up push the nose hard to the right, the tail servo horn should move tailward to counter the head turning and vice versa for left head push,if wrong direction observe then reverse the switch on the gyro, this comfirmed yr gyro orientation control, during hovering if head drifts left, u got to move the whole servo mounting on the tail boom toward the front a little at a time to counter the left drifting.

          happy flying

          u got pm.

          Comment


            #6
            Originally posted by gilera180
            Try reverse the gyro switch.
            Hi i already try reversing it.but it is still the same.

            Comment


              #7
              pictures of your tail setup and tx would help.
              Stop looking for a gyro in my plane, they are all in the head.

              Comment


                #8
                best is to pop by a funfly. you will learn a lot from there, since people will be there to explain to you what went wrong.

                Comment

                Working...
                X