T E A M
Hey guys.
Well, as the title suggests, im having a really weird issue with my JR770T 8900G combo, and my dx7.
Well, in normal mode(Gyro below 50%), the tail servo seems to move equally in both directions.
Left travel = Right travel.
However, in HH mode(Gyro above 50%), the tail servo does not want to move equally in both directions.
I know some may speculate that this is normal gyro behaviour. But the difference in servo travel is HUGE.
Left rudder is only a small amount, while right rudder is so much that the tail binds. I've tried it in the air, and it is what it seems.
Way too much right to control, but way too little left.
ATV is equal both ways.
Subtrim at 0%
Servo centered.
Gyro limit does not solve the problem.
Anybody at all? I didn't seem to have this issue when i was using my multiplex evo9.
Thanx so much guys.
Well, as the title suggests, im having a really weird issue with my JR770T 8900G combo, and my dx7.
Well, in normal mode(Gyro below 50%), the tail servo seems to move equally in both directions.
Left travel = Right travel.
However, in HH mode(Gyro above 50%), the tail servo does not want to move equally in both directions.
I know some may speculate that this is normal gyro behaviour. But the difference in servo travel is HUGE.
Left rudder is only a small amount, while right rudder is so much that the tail binds. I've tried it in the air, and it is what it seems.
Way too much right to control, but way too little left.
ATV is equal both ways.
Subtrim at 0%
Servo centered.
Gyro limit does not solve the problem.
Anybody at all? I didn't seem to have this issue when i was using my multiplex evo9.
Thanx so much guys.
Comment