How to mount JR R921 receiver on mini titan

[chasers]

Need some help from you guys... Any of you guys using the JR R921 receiver on mini titan? I just gotten myself the DSX9 and am wondering how to mount the receiver on the heli. I dun know where to mount the smaller receiver that is attached to the bigger receiver (if thats what you call it..keke).. Is there a proper way to mount the receivers so as not to have any interferences, as i read somewhere that the antennas got to be perpenticular to each other or something like that..

Any advice will be much appreciated.....

Cheers

[nacar]

Maybe something like this: The big rx on the rx shelf (antenna pointing to sky and ground) and the small rx on the top shelf near the boom where people normally mount the gyro (antenna pointing to left and right hand side of heli).

[chasers]

Maybe something like this: The big rx on the rx shelf (antenna pointing to sky and ground) and the small rx on the top shelf near the boom where people normally mount the gyro (antenna pointing to left and right hand side of heli).

Thanks for the suggestion....

Will the blade strike the smaller rx if I were to mount it on the gyro position ? Coz I recall someone recommending me to mount my gyro inside the frame to prevent the blades from striking the gyro. Or is the rx small and flat enough that the blades will not be able to strike it ? No chance to experiment it until tonite..

Cheers

[nacar]

I'm using the 6100 rx and I installed it at that place. Crashed once since I installed the rx there and the rx didn't get hit although the flybar was bent. I don't have your rx, but from memory, I think your small rx is smaller than the 6100, so should be alright to install it there.

[chasers]

Thanks for the info, will try it over the weekend and see how it goes....

If any of you guys have any suggestions, please share them here....

Cheers

[SPHB]

Thanks for the info, will try it over the weekend and see how it goes....

If any of you guys have any suggestions, please share them here....

Cheers

can show some pics to show that the flybar is not going to hit the reciever?
i vry poor so muz be kiasu and not destroy a 170 dollar reciever