If this is your first visit, be sure to
check out the Rules and Help. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The belt used for TRex are rated as MXL for industrial standard. Different rating has different teeth angle and the size of the angle. U have MXL, XL and etc.
In MXL, the distance between 2 teeth is around 2mm. The normal marking for MXL is like MXL472 which mean 472 number of teeth. Since u know the distance between 2 teeth is 2mm, thus the circumference for MXL472 is (472-1) * 2mm = 942mm.
To get the length for MXL472, then 942 / 2 = 47.1cm
Thus if u want to use TRex kind of belt, from the length u want, u should able to derive the MXLabcd number. Then using that number, go and ask those belt shop to see whether they have or not.
Comment