Rotor blades comparing for HB king2

[thong]

Hi, needs advise on these blades, anyone tested or fly resonably ok with these types of blade.Can give some experiences.
1)Emulation carbon blades.
2)Main blades(use normally on Walkera Heli like #36,#60...)
3)ABS blades.

Thanks

[jansonfinn]

Hi, needs advise on these blades, anyone tested or fly resonably ok with these types of blade.Can give some experiences.
1)Emulation carbon blades.
2)Main blades(use normally on Walkera Heli like #36,#60...)
3)ABS blades.

Thanks

wat kind of flying r u using them for? 3D or training?

[thong]

Rotor blades comparing for HB king2

Can kindly advise.For training and 3d.Thanks

[jansonfinn]

Can kindly advise.For training and 3d.Thanks

Since u r going into 3D as in inverted flight or loop, u need the carbon blades. If just flying ard n often crash, then get the ABS blades. otherwise, the wooden blades may do just fine

[thong]

Got It brother, Thanks for your advise.
One more question, Does it matters if the length of blades is different,must considering the tail rotor of course.Thanks

[jansonfinn]

Got It brother, Thanks for your advise.
One more question, Does it matters if the length of blades is different,must considering the tail rotor of course.Thanks

i think the max u can got is 315, nothing longer than that

[thong]

can i use others model blades like Trex450x or Blades with 315mm length.
Thanks

[jansonfinn]

can i use others model blades like Trex450x or Blades with 315mm length.
Thanks

yup, but u must use spacer in the blade grip in order to secure the blades.

[Heli_fanatic]

Got It brother, Thanks for your advise.
One more question, Does it matters if the length of blades is different,must considering the tail rotor of course.Thanks

its different in terms of stability and punch longer = better in general

[thong]

Many thanks brother, i seeked advise cause couldn't find blades for HB king 2, looking for substitute, now got it.

Thanks Brother for your time and advise.Good night!

[boo_saa]

I think ABS Flex alot.so worry might kana boom strake when land hard.

[Super-Hornet]

ABS is flexible... BUT still not soft enough. Normally boom strike is due to blade grip to blade is loose whereby the blade get lead/lag too much and it hit the tail boom.

SH

[boo_saa]

ABS is flexible... BUT still not soft enough. Normally boom strike is due to blade grip to blade is loose whereby the blade get lead/lag too much and it hit the tail boom.

SH

[thong]

Hi guys, anyone try this...
2)Main blades(use normally on Walkera Heli like #36,#60...)
white colour with 2carbon rods inside.
Thanks

[jansonfinn]

ABS is flexible... BUT still not soft enough. Normally boom strike is due to blade grip to blade is loose whereby the blade get lead/lag too much and it hit the tail boom.

SH

This is 1 good info! Thanks, I just got a boom strike last week.
Now i know wat to do le!!!