Announcement

Collapse
No announcement yet.

E-flite Blade CX2 tail drift

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    E-flite Blade CX2 tail drift

    ... ive tried nearly everything.. ive trimmed retrimmed set the proportional mix ant it drifts at random like im not setting anything ... its left for a minute then right .. and again and again but it flies i have to counter from the controller
    Helis
    Logo 500 3D

    Once upon a time , there were frequency pins , flybars and nitros...

    #2
    sounds like toliet bowl effect

    Comment


      #3
      If you adjust the trims on the 4-in-1 you have to unplug and plug the battery back on to re-initialise again. hope this helps...

      Otherwise you can always bring back to us to trim it for you...

      SKY HOBBIES SINGAPORE
      200, Jalan Sultan, #02-36A, Textile Centre, Singapore 199018. (along Jalan Sultan)
      2 Blocks away from KEYPOINT, Nearest MRT - Lavender MRT, ICA building side
      Tel : +65 6293 3968
      Website:
      Official You Tube Channel
      FACEBOOK :

      Comment


        #4
        Originally posted by SKYHOBBIES
        If you adjust the trims on the 4-in-1 you have to unplug and plug the battery back on to re-initialise again. hope this helps...

        Otherwise you can always bring back to us to trim it for you...
        cool service provided
        JR9XII PCM 72.xxx n XPS n FRSKY 2.4GHz

        me is " Kancheong spider "

        Comment


          #5
          haha just bought jus know with my bro
          so i have to "re plug" the batt?
          Helis
          Logo 500 3D

          Once upon a time , there were frequency pins , flybars and nitros...

          Comment

          Working...
          X