If this is your first visit, be sure to
check out the Rules and Help. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I did that before. You will need to unsolder the connectors on the potentiometer for both throttle and elevator and swap them. Then remove the self centering spring assembly on elevator (right side,view from the back) and mount it to the left side.
If you have difficulty on unsoldering, just bring it to me and I can do it for you.
I intend to do the de-solder/ re-solder work tonight.. but alas don't seem to be able to locate the pins that you've mention earlier.. think you can help me on this one?
Come to worst I'll really have to pay you a visit..
Comment