Pitch Gauge

[Pritam]

Hello Guys,

Can you tell me how to use a Pitch gauge
As i am quite new in this hobby

I am using the one which rotor is selling (3 In One).

Is their a manual for it ?


Thanks

Pritam

[Adrianli]

Pitch gauge got 3 in 1 type??? I never knew that!!!

1) Put the heli blade into the pitch gauge, not too far in.

2) Loosen the pivot screw.

3) With ur eyes, align the top of the pitch gauge with ur heli flybar.

4) Ensure that the top of the pitch gauge is parallel to the flybar.

5) Read off the scale of the pitch gauge for the pitch.


I hope tis helps.

[khpan2003]

3-in-1 == filyng Paddle pitch gauge + Main blade pitch gauge + main blade holder build into 1...

[Pritam]

Thanks Adrianli for the info will try to adjust the pitch

Pitch gauge got 3 in 1 type??? I never knew that!!!

1) Put the heli blade into the pitch gauge, not too far in.

2) Loosen the pivot screw.

3) With ur eyes, align the top of the pitch gauge with ur heli flybar.

4) Ensure that the top of the pitch gauge is parallel to the flybar.

5) Read off the scale of the pitch gauge for the pitch.


I hope tis helps.

[Pritam]

yes that' the one

3-in-1 == filyng Paddle pitch gauge + Main blade pitch gauge + main blade holder build into 1...

[lhgcha]

visual reference @ http://www.raptortechnique.com/pitchgauge.htm

usually, i'd check that my gauge is mounted correctly by setting my pitch to zero (http://www.raptortechnique.com/image...setting01s.jpg) and ensure it reads zero on the gauge. If it does not, i'd just offset the other readings accordingly.

[nizamysf]

where can i get a pitch gauge and how much does it cost?
wanna use for my trex se

[w_kby]

Pitch Guage

where can i get a pitch gauge and how much does it cost?
wanna use for my trex se

Hi Nizam, remember me (with my son), we met last saturday.

There are many design for pitch guage and most LHS carries them. You can see Rotor web site that carriers them :

http://shop.rotor.com.sg/show-detail.asp?prodid={6870809B-64C8-4C45-BE79-5A2260BFF092}

http://shop.rotor.com.sg/show-detail.asp?prodid={74E0BC80-4E04-4D7D-B3D7-2D522C43F71E}

or in my opinion, you can make your own :

http://www.daddyhobby.com/forum/showthread.php?t=14296

(Actually, you can buy just the blade grip from Rotor (seen them the last time there) and DIY the rest....

Alternnately, there is someone (MEXX) selling one at the marketplce :

http://www.daddyhobby.com/forum/showthread.php?t=14239

Hope this is useful...

[Pritam]

Hi Nizam,

I bought mine from Rotor for $35.
Its called 3 IN 1 Pitch Guage.

Regards

Pritam

where can i get a pitch gauge and how much does it cost?
wanna use for my trex se

[nizamysf]

Hi Nizam, remember me (with my son), we met last saturday.

There are many design for pitch guage and most LHS carries them. You can see Rotor web site that carriers them :

http://shop.rotor.com.sg/show-detail.asp?prodid={6870809B-64C8-4C45-BE79-5A2260BFF092}

http://shop.rotor.com.sg/show-detail.asp?prodid={74E0BC80-4E04-4D7D-B3D7-2D522C43F71E}

or in my opinion, you can make your own :

http://www.daddyhobby.com/forum/showthread.php?t=14296

(Actually, you can buy just the blade grip from Rotor (seen them the last time there) and DIY the rest....

Alternnately, there is someone (MEXX) selling one at the marketplce :

http://www.daddyhobby.com/forum/showthread.php?t=14239

Hope this is useful...

eh, hi bro...
so already decided on what to get?

[w_kby]

eh, hi bro...
so already decided on what to get?

Yes, it will be a Trex...not your SE model, either 450XL HDE or CDE...still studying the differences.

Bro...do PM me on your progress and we can learn together.....