Flybar problem

[skareb1986]

Hi guys have you all experience this problem before, my flybar wont fit into the flybar set, i can only fit the flybar in until the threaded area after that it wont move in anymore, my picture is below, is something wrong ? .. to make it clearer the flybar cant go into the gold inlet..only threaded area can

[UH-1H]

You got a call...

[awesome]

assuming that you have already removed the grub screw, i suspect you are using the flybar meant for 450x. i heard that it is slightly bigger in diameter..

[koon]

Ask for 450XL flybar instead, you've got the 450X flybar which is .2mm bigger in dia. Alternatively you may sand it down to fit.

[ethinger]

Ask for 450XL flybar instead, you've got the 450X flybar which is .2mm bigger in dia. Alternatively you may sand it down to fit.

confirmed this problem, i had the same problem.
i sand it down, too tired so i just left it and got new one... lol

[skareb1986]

and to tink i actually attempted to remove the locktite screws and the cross screw is quite deformed .... will double confirm this tml.. 10q all