What brushless setup for E-savage? Mamba Max 5700 or Novak Himaxx 4.5?

[LittleGiant]

Will the 2 setup work for the e-savage?

Can any pro here tell me about the mamba max in an e-savage?

I read the whole e-zilla thread already but it nv mention anything about the mamba max.

[LittleGiant]

After much researching, the Novak HV brushless system is simply too expensive and is only limited to Novak brushless motors.

So Novak is out.

The mamba max motor is simply too small (I factor in physical size for brushless motor too) to handle the e-zilla. From what I read, it will run too hot. The esc with a 5700 will thermal easily with 12 cell set up. And 6 cell setup with the 5700 is not very impressive either.

Right now I am considering using Feigao 540 6L (4096kv) for my e-savage. Can anyone advise me if this will be good? Will the motor be able to drive the e-savage without any problem? I am thinking of running either 2 packs of 6 cells in parallel or 12 cells in series or 7 cells in parallel or 14 cells in series.

Which will work?

Any idea?

Then which ESC is recommended to run such a setup?