HPI E-Ziila Monster Truck

[CoolMX]

E-Zilla climbing a 6.5inch kerb.

Hi Guys

Here is a video of my E-zilla climbing over a 6.5inch kerb.

http://www.daddyhobby.com/gallery/showphoto.php?photo=2115&cat=500&ppuser=72

Cheers

[CoolMX]

Skid Plate for E-Zilla

Hi Guys,

Here are the pictures of the SKID Plate that i fabricated using 1mm thick Aluminium sheet. Damn they are tough!!

Cheers
Cool

[Mad Armour]

Hi Guys,

Here are the pictures of the SKID Plate that i fabricated using 1mm thick Aluminium sheet. Damn they are tough!!

Cheers
Cool

Great. That saves you quite a few bucks! I wonder if a 2mm plate is easy to bend in shape!

[Artyspec]

Hi Guys,

Here are the pictures of the SKID Plate that i fabricated using 1mm thick Aluminium sheet. Damn they are tough!!

Cheers
Cool

Where did you get the plate?

[CoolMX]

Great. That saves you quite a few bucks! I wonder if a 2mm plate is easy to bend in shape!

Yo, trust me. 1mm is tough enough liao. Pretty difficult to fabricate liao, unless you really have a lot of tools lah.

[CoolMX]

Where did you get the plate?

Oh i got the Aluminium sheet from one of the Aluminium supplier located at Helmaton Road. They sell me those left over stock cut out from super hugh piece type.

Damn good price, i only paid $4 for 2ft by 2ft piece.

[Mad Armour]

Yo, trust me. 1mm is tough enough liao. Pretty difficult to fabricate liao, unless you really have a lot of tools lah.

It's not that I don't trust you. I happen to have a 2mm plate, but no 1mm plate.

[CoolMX]

It's not that I don't trust you. I happen to have a 2mm plate, but no 1mm plate.

Wah serious huh. Don't bother to try lah. Where you stay i pass you some enough 1mm from my left over. hee hee

[Mad Armour]

Wah serious huh. Don't bother to try lah. Where you stay i pass you some enough 1mm from my left over. hee hee

Pai lah...... I'll need to look around. Maybe by chance a 1mm plate will show up. I was at the hardware shop yesterday, plenty of alu plates available but I didn't think of getting some.

[Mad Armour]

Sorry, typo....I meant to type 'pai seh'....not 'pai'.

[CoolMX]

Sorry, typo....I meant to type 'pai seh'....not 'pai'.

Hee hee, no worries. Just let me know if you need any.

[CoolMX]

2 real life Zilla

Here are 2 pictures of 2 real life zilla's hee hee

[CoolMX]

Resume modifications pictures

Yo, after stoping for a week, i am back. Here are some pictures of a SAVAGE bumper.

[Mad Armour]

Yo, after stoping for a week, i am back. Here are some pictures of a SAVAGE bumper.

Wah, looks like you're way down the slippery slope, with no bottom in sight!

[CoolMX]

Wah, looks like you're way down the slippery slope, with no bottom in sight!

Whahahahaa... i think so too leh. I still have a few things sitting there, waiting for me to put it up.

1) Motor HeatSink with Fan from 3Racing.
2) New Proline StreamLine Truck body.
3) Aluminium Alloy Body Stand Silver Front & Back.
4) DIY Shock socks Black.

Am also eyeing if i should get the E-maxx's drive shaft as some of the commented that it is direct fitting.

But i suppose i am going to stop after adding on these few items and go back to building planes for flying liao. Has a few new planes NIB waving at me everynight hee hee

I will pose more picts once i am done. So far i have also combine 2 broken rear drive shafts into 1 as a good replacement to stock hee hee.

Cheers