Hi all EP boats experts....
I've doubts for the followings, hope I can recieve some advise from the experts. Followings are some typical examples:
1) ESC (WATERCOOL- 60AMP)
Continuous Current Output: 60 amp
Burst Current Output : 120 amp
2) LIPO (4S 25C 3300 amph)
Constant discharge rate : 25C - 82.5 amp
Burst discharge rate: 50C - 165 amp
3) The motors are the stock motors from JH for Jollymotor - Minicat,
Motor (included):2848-2450 Brushless x2
As I'll be embarked for the above setup for my minicat which I've just burned my lipos and esc, don't want to involved in expensive experiments anymore, can anyone advise can these setup be a reasonable setup, if not, what will be the recommendations.
Thanks for info. & help
I've doubts for the followings, hope I can recieve some advise from the experts. Followings are some typical examples:
1) ESC (WATERCOOL- 60AMP)
Continuous Current Output: 60 amp
Burst Current Output : 120 amp
2) LIPO (4S 25C 3300 amph)
Constant discharge rate : 25C - 82.5 amp
Burst discharge rate: 50C - 165 amp
3) The motors are the stock motors from JH for Jollymotor - Minicat,
Motor (included):2848-2450 Brushless x2
As I'll be embarked for the above setup for my minicat which I've just burned my lipos and esc, don't want to involved in expensive experiments anymore, can anyone advise can these setup be a reasonable setup, if not, what will be the recommendations.
Thanks for info. & help
Comment