24" rek tunnel hull build

[rogerp1]

just thought i may post some pictures of my new 24" wof tunnel hull

the boat weighs 2lbs 24"long 12"wide

plan on fitting a REK carbon fibre outboard lower leg unit
fitted with a brushless motor running 14.8v 4000mah 20c lipos

here are a few pics so far

[CCx4]

Nice!!!!

[Adrianli]

Looks good.


May I know the motor it is installed?

[rogerp1]

Looks good.


May I know the motor it is installed?

A36-46 Brushless Hybrid Inrunner/Outrunner

[Adrianli]

A36-46 Brushless Hybrid Inrunner/Outrunner

Watz the KV for tis motor?

[rogerp1]

Watz the KV for tis motor?

3200kv

[skyblueblue]

3200kv

Wow !! that gonna be fast on 4s

Hope to get a chance to see it running

[Doraemon]

What a nice hull nothing beats a bit of wood grain through clear coat

I think HZM better contact Roger to see where he got that nice BL outboard... can't let HZM collect too much dust on his shinny TS2

[BryanLow]

Can bring the outboard electric leg from Towerhobbies. They have it under Aqua craft. I was thinking of getting it.

[rogerp1]

Can bring the outboard electric leg from Towerhobbies. They have it under Aqua craft. I was thinking of getting it.

i looked at getting one of the aquacraft outboards i thought that thet are a little heavy (they are a aluminium lower )

the one i have is a made of carbon fibre

i have a spare one if anybody is interested in one

[Frank]

4s on a 3200KV motor will be way too hot but will be freaking fast though if you can find the right prop
May I know where you bought the REK outboard from and what it the size of the stub?

[Adrianli]

4s on a 3200KV motor will be way too hot but will be freaking fast though if you can find the right prop
May I know where you bought the REK outboard from and what it the size of the stub?

As long as the motor can take it n he got a huge 240A ESC, it can definately fly. Controlling leh................not too sure.

Anyway I guess it is restricted to 45mm props n smaller.

[rogerp1]

4s on a 3200KV motor will be way too hot but will be freaking fast though if you can find the right prop
May I know where you bought the REK outboard from and what it the size of the stub?

i bought the rek a fair while back (i can not remember where i bought them now )

i do have a spare one floating about if you are interested (comes with motor mount and flex shaft ) ?

the stub shaft is from a k&b outboard (3/16") these thread streight into the lower unit

[Frank]

i bought the rek a fair while back (i can not remember where i bought them now )

i do have a spare one floating about if you are interested (comes with motor mount and flex shaft ) ?

the stub shaft is from a k&b outboard (3/16") these thread streight into the lower unit

thanks
I know where to look if i decide to get one