If this is your first visit, be sure to
check out the Rules and Help. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Don't leave lah, so how? building or not building?
Of course building lah, but the material selection is a headache man. I have a few options:
Wings:
Balsa and monokote (so if it fails, I can convert it to nitro)
Coro and Balsa (very fast building with the CA)
Foam and CF very fragile
Alum/CF tubings and nylon sheets or fabric...
1. balsa/monokote, only if you have the detail rib profiles and spars and what not, ironing monokote needs some patience too.
2. Coro/Balsa, this is your niche area
3. Foam/CF, forget it i don't think you 'd like it too
4. Aluminium/CF Tubing/Ripstop Fabric, this is a new frontier, it would be interesting on this forum if you venture into this area, would be challenging to say the least, but if you're successsful, damn rewarding!
1. balsa/monokote, only if you have the detail rib profiles and spars and what not, ironing monokote needs some patience too.
2. Coro/Balsa, this is your niche area
3. Foam/CF, forget it i don't think you 'd like it too
4. Aluminium/CF Tubing/Ripstop Fabric, this is a new frontier, it would be interesting on this forum if you venture into this area, would be challenging to say the least, but if you're successsful, damn rewarding!
How?
Of course option 2 is by default first choice... to me at least
Comment