Announcement

Collapse
No announcement yet.

airtechnic servo

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    airtechnic servo

    got a airtechnic servo AT-90MG from JH to replace one of dead servo.

    But not too sure whether the orange wire is ground or control??

    #2
    Orange - Signal
    Red - Live
    Brown - Ground

    sigpic
    FASSTGot Quard?

    Comment


      #3
      If not sure. Can look at the contour of the plug. There is a chamfered curvature at one edge of the plug that will fit only in one direction into the receiver.
      I'm Remotely Controlled ...

      Comment


        #4
        Originally posted by blueangel View Post
        If not sure. Can look at the contour of the plug. There is a chamfered curvature at one edge of the plug that will fit only in one direction into the receiver.
        all Rx got the mistake proofing groove for the servo plug

        Comment


          #5
          Originally posted by jansonfinn View Post
          all Rx got the mistake proofing groove for the servo plug
          not really actually.

          I use Assan 2.4GHz Rx and it's only bare pins, no grooves.
          Relax and Enjoy The Hobby.
          Note to self: Must stop buying too much stuff.

          Comment


            #6
            Originally posted by Jack_Chen View Post
            not really actually.

            I use Assan 2.4GHz Rx and it's only bare pins, no grooves.
            ya, this is wat i mean. I replaced the word 'Not' with ''

            Comment

            Working...
            X