Need HELP....... Electronic for Estarter

[MM Mini Titan]

Hi there i need help from the experts who had great fun of their Estarter on the setting up of electronic on my newly build Estarter.Currently i have HS65 servo,11.1v(2200mah)Kong Power battery which was from my previous heli(Retired).For the servo i can mount it on the plane and for the battery i think it is big and heavy so not a good choice.
Now what i need is the correct setup for a good 8 to 10 min of fun flying.

1)Brushless motor how many kv.

2)What amp ESC to match.

3)Recommended Lipo and how long can is fly.

4)What types of props and size.

Many Many thanks to all and did i MISS OUT anything

[jansonfinn]

Hi there i need help from the experts who had great fun of their Estarter on the setting up of electronic on my newly build Estarter.Currently i have HS65 servo,11.1v(2200mah)Kong Power battery which was from my previous heli(Retired).For the servo i can mount it on the plane and for the battery i think it is big and heavy so not a good choice.
Now what i need is the correct setup for a good 8 to 10 min of fun flying.

1)Brushless motor how many kv.

2)What amp ESC to match.

3)Recommended Lipo and how long can is fly.

4)What types of props and size.

Many Many thanks to all and did i MISS OUT anything

1) ard 900 - 1200kv is good enough
2) Depend on ur motor current drawn. 25A should be good enough
3) 3S 1200 - 1600mAh. Flight time 5 - 10 mins
4) Follow the motor recommended prop size

[stranger]

A friend of mine have the following setup.
motor 1400kv
prop 8 inch
esc 25amp
lipo 3s 2200mah( need to cut a bigger slot for it)

i saw my friend flying it, it is a little fast, climb rate is GREAT.

or you can go for
motor 1000kv
prop 10 X 4.7
esc 25amp
lipo 3 s 2200mah.
i think that is good enough.
flying time was about 8 mins or so.
good luck !

[stranger]

and APC prop. they are hard.
GWS prop is lighter but breaks every now and then.

[MM Mini Titan]

Thanks to you all buddy,i will go to one of the hobby shop to get the stuff for my estarter so excited to fly it.
Just one more things guys im not sure whether can i use my kong power 2200mah battery,i heard from some people that keep the Estarter as light as possible so that it will float in the air, not sure yet to try

[jansonfinn]

Thanks to you all buddy,i will go to one of the hobby shop to get the stuff for my estarter so excited to fly it.
Just one more things guys im not sure whether can i use my kong power 2200mah battery,i heard from some people that keep the Estarter as light as possible so that it will float in the air, not sure yet to try

if u dun want to spend money to buy more batts, u can use them. i'm using 2200mah heli packs for my planes as well.

[romihensem]

hmmm

2200 mah packs are considered too heavy for the plane. to compensate for the weight of the pack, u need a higher torque motor thus needing a higher amp esc. estarter is considered a trainer or in my case, a relax type of flying (cause i'm flying it too... hehehe), so doesnt need so much power. lesser power = lesser amp drawn = lesser lipon capacity = lesser weight. trust me u will still enjoy the flying if u keep it as light as possible.
btw my setup is....

1400kv outrunner (spinning a 9x6 APC E)
25A hobbywing esc (prefer a 20A but thats the only one i have left)
Dualsky 1300mAh 15C lipos

Flight time is bout 6-7mins +/- (I set my timer to 6 mins)

Hope it helps bro....