which bl motor ie. in runner or out runner would u guys recommend for flying this plane?? if possible with combination using which batt and which esc for normal flying and 3d flying??? i'm on a budget so a cheap one would be good. hehehe
Announcement
Collapse
No announcement yet.
extra 330s brushless set up
Collapse
X
-
I'm setting up Edge540T & have Extra330 on standby.
The 2 are quite similar in terms of weight & size.
For planes, we always use out runner. In runner is meant for EDFs & Helicopters cause you need the RPM.
My setup is Revox KA36-16M (1050kv, Typical 10-25A, Max 33A, weight 116g).
Usually ESC must match on highest typical/max current.
For me, I use 50A cause ESC can be easily shared with other planes & burning it is very costly. So must make sure you match/exceed the motor ratings.
Battery size depends on how how you fly & much time you wanna be airborne.
For the motor above, you need one that can draw <33A, ie. >15C for 2.2Ah
Battery can also be shared with other planes & blotting it is also very costly.
For me I use 2.2Ah 25C 11.1.
I'm also quite new to this hobby.
Hope that helps.
Comment