ESC problem

[madflurry]

i've been using a hobbywing 25A ESC with 2410-09 BL motor. The problem is that when i push the throttle about 3/4 way full, the motor is already running at full speed. Is there anything i can adjust so that this wont happen??

Need some advice plz..

[Ghostfit]

From my experiences, this usually happens when you're over-Propped !

The extra load prevents the motor from reving any further, try a prop with a smaller diameter or pitch.

My guess is that after running for 5 minutes, the motor will be quite hot !

[madflurry]

oh ic..... yar the motor get quite hot after some time.. maybe that's the reason.. thanks!