Announcement

Collapse
No announcement yet.

Cessna

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Cessna

    Looking for a electric Cessna any good model to recommend ???

    #2
    Check these out.

    *** N.B. Below recommendation based on EP (not Nitro)

    for a good model.
    u can check it out from Mack. or George who are selling Etec LIPOs.

    Ever seen Mack carrying a very nice, light Balsa Cessna.

    For RTF, u can try JetHobby (Fook Hai Building) around opp Speakers' Corner.
    Entire set cost around 200. But not advisable to get the RTF.

    Best to buy all the parts (to form the entire kit). around 80 - 90.
    Use good electronics is important.
    *** Need a lot of power to fly. Need a long runway of at least 20-25 meters to take off. Handlaunch is better. But need to throw 45 degree upwards with some forward thrust. Use brushless will be a better configuration.
    Overall, quite good to fly.
    Tx: Futaba T6XA 29MHz
    Planes in service
    ArtTech Cessna 182, 2nd;Self-Built Flying Wing, 2nd;GWS Formosa I, 2nd;GWS eStarter, 2nd; Interceptor EP, 2nd; World Model, Melting EP

    Nitro
    Sonic 30 size High Wing

    Others
    GWS DHC Beaver;EPP Mustang P51;
    BAT Flying Wing; HoneyBee FP: Hanger, still learning to fly


    Scrapped
    Hacker El-Bandito

    Boats in service
    Negotiator;Destroyer Yamato (tribute to Temannis)

    Comment


      #3
      Originally posted by Invisible Angel
      *** N.B. Below recommendation based on EP (not Nitro)

      for a good model.
      u can check it out from Mack. or George who are selling Etec LIPOs.

      Ever seen Mack carrying a very nice, light Balsa Cessna.

      For RTF, u can try JetHobby (Fook Hai Building) around opp Speakers' Corner.
      Entire set cost around 200. But not advisable to get the RTF.

      Best to buy all the parts (to form the entire kit). around 80 - 90.
      Use good electronics is important.
      *** Need a lot of power to fly. Need a long runway of at least 20-25 meters to take off. Handlaunch is better. But need to throw 45 degree upwards with some forward thrust. Use brushless will be a better configuration.
      Overall, quite good to fly.
      thks Invisible Angel .... ehh Mack as in a person or a company ? you came across World Models EP cessna ?

      Comment


        #4
        Mack is someone living at Punggol.

        Quite near PFW flying ground.

        World Model Cessna EP, I dunno where to get it.

        But if u r interested.
        u can try Thatz Hobby or NTC Hobby.

        Cheers
        Tx: Futaba T6XA 29MHz
        Planes in service
        ArtTech Cessna 182, 2nd;Self-Built Flying Wing, 2nd;GWS Formosa I, 2nd;GWS eStarter, 2nd; Interceptor EP, 2nd; World Model, Melting EP

        Nitro
        Sonic 30 size High Wing

        Others
        GWS DHC Beaver;EPP Mustang P51;
        BAT Flying Wing; HoneyBee FP: Hanger, still learning to fly


        Scrapped
        Hacker El-Bandito

        Boats in service
        Negotiator;Destroyer Yamato (tribute to Temannis)

        Comment


          #5
          PIPS is selling the World Model Cessna,
          But its balsa,..good for flying NOT good for dings and repair.

          Suggest you get a foamy trainer for easy learning and less down/hanger time.

          ThunderTiger makes good foam planes in the supercub lines.

          Cheers,
          Leon

          Comment

          Working...
          X