Bought some cheap planes in KL.

[yvesgoh]

Can any one teach me how to mod to add in rudder, elevator bla bla bla...

[yvesgoh]

sorry dunno how to post pictures... trying out

[yvesgoh]

Bascally the plane is a foam toy plane with motor but there is no aerlion controls, rudder and elevator. was thinking to mod into a rc plane. Btw, bought this with 50% discount and is only 30++rm at toy city in times square.

Saw Kyosho, but the price was way more expensive than sg....

[Newflyer1]

hi yves,

the plane is not foam? if foam and cut.

I did saw someone add in alerion into his plane, same concept could be use.

he just cut a piece of plastic (think and firm enough) and stick on the wing (u can do tat on the tail).

He also used http://www.jethobby.com.sg/cgi-bin/e...19&cid=7&idx=1 to attached the plastic to the plane to make it movable yet attached....

[yvesgoh]

hi yves,

the plane is not foam? if foam and cut.

I did saw someone add in alerion into his plane, same concept could be use.

he just cut a piece of plastic (think and firm enough) and stick on the wing (u can do tat on the tail).

He also used http://www.jethobby.com.sg/cgi-bin/e...19&cid=7&idx=1 to attached the plastic to the plane to make it movable yet attached....

The plane is a foam plane.... does it make any difference if i just cut or i uses hinges.........

[kenshinz]

Yo Bro, welcome back looks like u had a fruitful trip eh , the hinges is used to connect the aerlions, rudder or elevator to the plane. You can use fiber tape too.

Once you cut out the aerlion, rudder or elevator, think need to sand 45 degree so that after you join them back to the wing, it can still move up and down, or left and right.

[joe yap]

Don't have to go all the way to KL. Pelagi at J.B. also sell these.

[yvesgoh]

Yo Bro, welcome back looks like u had a fruitful trip eh , the hinges is used to connect the aerlions, rudder or elevator to the plane. You can use fiber tape too.

Once you cut out the aerlion, rudder or elevator, think need to sand 45 degree so that after you join them back to the wing, it can still move up and down, or left and right.

Still not back....... still in KL.... flying to dubai after that..... Will experiment that after i return......... thanks

[yvesgoh]

Don't have to go all the way to KL. Pelagi at J.B. also sell these.

thaks for the pieces of information.... probably will search for the P51 in pelangi as they do not sell here....... is it sold under toy city as well?

[alamin2]

Yo Bro, welcome back looks like u had a fruitful trip eh , the hinges is used to connect the aerlions, rudder or elevator to the plane. You can use fiber tape too.

Once you cut out the aerlion, rudder or elevator, think need to sand 45 degree so that after you join them back to the wing, it can still move up and down, or left and right.

if dun wanna cut 45 degrees you gotta leave at least 1mm gap before taping it together

[joed]

Wow great!

You flying to Dubai with 3 planes cool! Look like you enjoy your trip.

See ya back home soon & down at the field. Take care.

[yvesgoh]

Wow great!

You flying to Dubai with 3 planes cool! Look like you enjoy your trip.

See ya back home soon & down at the field. Take care.

hahahaha no lah bro..... 2 only... just took a walk around on weekend adn saw the place at 50% discount so just grab lor.... most probably will sent it back home first... carrying it around is

see you soon....