Hi Guys,
I need 2 plates routed out of 1.5mm carbon plates.
Unfortunately my Sherline mill does not allow me to cut the size and most commercial shops do not do small quantities:-(
The part is 270x210mm or 270x105mm if cut separate (2 plates).
Please drop me a PM if you are able to help me out.
Drawings are available in .dxf format.
Thanks !
I need 2 plates routed out of 1.5mm carbon plates.
Unfortunately my Sherline mill does not allow me to cut the size and most commercial shops do not do small quantities:-(
The part is 270x210mm or 270x105mm if cut separate (2 plates).
Please drop me a PM if you are able to help me out.
Drawings are available in .dxf format.
Thanks !