Cozy Mark IV Foam Pusher-Prop Plane Build

[AstroBoy]

I've finished drawing the full sized plans for this canard pusher-prop plane, as the name implies, i'm trying to build a scale replica, well sort of lah
Picture below are REAL Cozies flying in formation during a FLY-IN festival somewhere in US, don't you think it looked fantastic up in the air!

Flight video of the Cozy here

Flight video of the Cozy - RC Group

Flight video of the Cozy - DH



FREE Plans here

[Mathieu]

That looks very much like a beech starship. cool.

[AstroBoy]

front view of REAL cozy

[AstroBoy]

isn't she beautiful?!

[AstroBoy]

side view

[AstroBoy]

ok, let's get to work! bottom piece of foam fuselage with 3/8" balsa triangle strips glued to both sides

[AstroBoy]

Front of fuse, these are ply bearing plates for the canards, build technic will be like the F-15's elevators

[AstroBoy]

stacking up all the formers, F1, F2, F3, F4 and F5

[AstroBoy]

almost finished with the fuselage, left the nose cone to cut tonight.

[stuka]

Cool mann....

[AstroBoy]

looking into the front of fuse, canard servo and flight battery will sit in here.

[AstroBoy]

full view from the back

[AstroBoy]

bottom view, will be sanding down the edges and fibreglass the whole length of fuselage.

[AstroBoy]

glued in the motor mount, GWS stick style, i'm trying the eps350 first, if not enough juice, will replace it with eps400 motor

[AstroBoy]

.