Announcement

Collapse
No announcement yet.

li po expand

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    li po expand

    well guy a ?? well i just try my lipo 3s 1200 20c .new on my plane 25amp speed 500. after using the full power for 7min plus i found that the batt expand and hot.like it gonna explode.but i use my polyqust 3s 12c 1450 on it it ok and that batt is warm,
    anyone here has any expand on that tks.
    mike

    #2
    batt expand

    well here the batt expand which was att:
    well it was after using it on plane and not after chargin.and charging is fine!!

    mike

    Comment


      #3
      looks like a time bomb to me,
      please get rid of it using proper care
      i'm a rc sotong. And i know nuts about it.

      Comment


        #4
        I had the same problem with a few packs I got from THS

        heard that it's a batch problem....

        Return the batts and ask for new one

        for kokam...it's better to balance each cell periodically
        TREX 500 ESP
        Futaba T12FGH

        Comment


          #5
          Most lipo will balloon if its overdischarged. In your case, u must have had a very powerful flight for 7 min.

          To use that battery for 7 min flight time, your avg current draw should not exceed 10 amps. Does your esc provide a lipo cutoff?

          Comment


            #6
            nope my esc is for brash motor.well just discard the thing. look like time bomb.
            quite scaring.
            mike

            Comment


              #7
              sorry yap it provide cut off at low level.but i use sub c sanyo no problem at all and other brand lipo except kokam.well lost confidence in that product.
              mike

              Comment

              Working...
              X