T E A M
Blinged RAPTOR
Enjoy 
-
32The metal head62.50%20The metal skid15.63%5The horizontal fin9.38%3The decals12.50%4 -
how does it fly with the evo head?JR 9x
Raptor 50 SE
Raptor 90 3D
Mini-Titan
Superb machine!
Piper Warrior 2 Pa-28-161
Lycoming O-320-D3G 160HP
Pilatus PC-21
Pratt & Whitney PT6A-64B 1600SHP -
nice skids
Don't PCW
Beam E4
Flybarless Trex 600N VBAR 4.0 | OS50 Hyper
Trex 700 LE | YS91SR3CComment
-
The head is SR7 Metal head of Eagle 3. It flies very stable and I noticed that the headspeed is higher with the same throttle curve. With respect to agility, it is also very agile.Comment
-
I bought the skids form RC Mega sale of SHS. Only SGD8 cheap, nice and very strong. It can sustain hard landing during auto'sComment
-
wow...nice... i didn't know eagle 3 can fit the main shaft. that has got to be a super expensive head man...JR 9x
Raptor 50 SE
Raptor 90 3D
Mini-Titan
Superb machine!
Piper Warrior 2 Pa-28-161
Lycoming O-320-D3G 160HP
Pilatus PC-21
Pratt & Whitney PT6A-64B 1600SHPComment
-
Nicely done. Love the blue... Is that a bed that ur raptor is perched on? 
Comment
-
How much did the whole head cost?
Thanx!
SLOPE SOARING NOT A CRIME
The irresistible desire, for the irresistibly desired
Multiplex Royal Evo 12 user, and Proud of it.Comment
-
did the skids fit right on or was drilling needed for the rappy frame?JR 9x
Raptor 50 SE
Raptor 90 3D
Mini-Titan
Superb machine!
Piper Warrior 2 Pa-28-161
Lycoming O-320-D3G 160HP
Pilatus PC-21
Pratt & Whitney PT6A-64B 1600SHPComment
-
All the blue parts on top of the swash plate cost around SGD850 more or less. I can't remember the exact amount already. Regarding the skid, it has some modifications but the job is easy. Just drill some holes, then bolt them in. They looks nice with the decals. The decals consumed most of the work but it was rewarding. The X-Treme blades are perfect. I bought them from Hobby Shack for only SGD115. I fly this bird using Futaba 9Z WC2 radio. The setup flies awsome.Comment
-
Where do u fly? After my reservist can drop by and drool at your flying...Comment
-
The head's nice...but the metal skids..though strong..are known to break frames in crashes....
I rather replace the skids then the frames....
TREX 500 ESP
Futaba T12FGHComment
-
The blades are the same ones YC used to scuff the runway during the mega meet....saw ah tat flying it when it just came in.awesome...but Yc's pair was a little too flexy.....blade farts a lot...so something must be wrong....how are your blades farting???
Noticed yuo use freya's paddles...just wonder how the paddles are on a 50 size?
What HS you running?TREX 500 ESP
Futaba T12FGHComment
-
I operate this blades at 2100RPM and I didn't encounter blade flapping. But I'm not a hard 3D flyer so maybe that's the reason. Its true that when YC do his hard manueversm the blade flaps. About the pedals, controls are very precise, stable at hover and agile in manuevers. The only problem with this setup is learning curve slows down as you are scared to drop
so you cannot just do what you want. It is only nice to see but scary to fly. The only reason why I installed an SR7 in my raptor is, I sold my freya but the buyer is not interested to buy the head. So I better utilize my investment in my raptor. 
Comment
-
Did u happen to walk to rotor today?
I saw a guy in a yellow sleeveless shirt carrying a raptor that looked like this one to rotor this afternnon.Comment
Comment