Hobbico Mk2 or T10?

[新加坡宁]

which one..?

[新加坡宁]

请各位大哥指点

Mk 2 or Tahmazo T10...

[johnson]

This seems to be a more advanced version compared to T10. However, don't know about the software logic..... see the link

http://www.daddyhobby.com/forum/showthread.php?t=3886

[新加坡宁]

But not available here

I probably will buy that MK2,it has 2 seperate built in chargers though.But no LCD...

[新加坡宁]

Thanx John!

thanx John for the thread!

[helirulz]

do note that mkII will only charge up to 3s lipo and 2A max

[新加坡宁]

hello Heli

Yes,but isn't it same as T10?Up to 3 lipo cells..?

[helirulz]

pls dun confuse...
MkII will only charge up to 3s Li Ion (12.3V) NOT LiPo
t10 is a LiPo/Li Ion

[新加坡宁]

hmmmmm..

Helirulz,Mk 2 also can charge lipos.

[新加坡宁]

Here's the specs..

http://www.hobbico.com/chargers/hcap0290.html

[helirulz]

yes it can charge lipo batts. BUT it wont charge them to FULL CAPACITY.WHY??cos li ion batts peak at 4.1 volts BUT lipo batts peak at 4.2 volts.Wanna know wat happens to li ion batts when they get charged to 4.2 volts???
well BOOM and there goes your batt. pack gone up in fire

Another reason to support my above comment:
Chargers that can charge both lipo and li ion are digital chargers.There is an individual setting for EITHER lipo or li ion OR there is a program where u can switch between 4.1 or 4.2 V peak settings(eg. triton)
So do u see any switch that switches peak voltage between 4.1/4.2V on the MK II??
ans is NO

[新加坡宁]

Thanx for the tip..

T10 got?

[helirulz]

yes

[新加坡宁]

Thanks ..

Answer is obvious,i will go with T10!