Problem with my plane.

[readytogo]

hi ppl, i am a beginner to flying and i got some prob with my plane. When i switch on by the transmitter the servo motor of my Easy Star keep on moving by themselves and the propeller is not turning. i cannot control the servos and i dunno wat to do now. The manual say turn on the transmitter 1st b4 turning on the recevier. So is the receiver on when i connect it to the battery? Pls help me.

[tucfaz]

Where were you when you turn on your TX?? At home or at a field??

hi ppl, i am a beginner to flying and i got some prob with my plane. When i switch on by the transmitter the servo motor of my Easy Star keep on moving by themselves and the propeller is not turning. i cannot control the servos and i dunno wat to do now. The manual say turn on the transmitter 1st b4 turning on the recevier. So is the receiver on when i connect it to the battery? Pls help me.

[randomtask]

Hi RTG

where do you stay, if anything can bring down your plane to the nearest funfly and get some help 1st hand.

Cheers
Adnan

[baby_zyklon]

What tx, what rx?

If tx is in pcm mode, rx in ppm mode, you will get that problem.

[readytogo]

Problem with my plane.

Ya i turned on the TX and RX at home and on the field also and the same things happened. Cant control the servos, propeller not moving and the servos move by themselves.
i live in sembawang.

[mh3400]

Ya i turned on the TX and RX at home and on the field also and the same things happened. Cant control the servos, propeller not moving and the servos move by themselves.
i live in sembawang.

is you servos connector plug to the rx in correct porarity ? sign, +ve and -ve ?

[readytogo]

Problem with my plane

Yup the polarities are correct.

[Adrianli]

Which part of Sembawang u stay??? There are flyers near the mosque, can go there n ask for help.

I not a plane person but can have a look at ur elec setup if u r nearby(walking distance).

[VinCopter]

hi ppl, i am a beginner to flying and i got some prob with my plane. When i switch on by the transmitter the servo motor of my Easy Star keep on moving by themselves and the propeller is not turning. i cannot control the servos and i dunno wat to do now. The manual say turn on the transmitter 1st b4 turning on the recevier. So is the receiver on when i connect it to the battery? Pls help me.

From your description, the receiver did not receive any signal from the transmitter. That’s why the servos are moving by themselves.

Check the crystals by pulling out and put back the crystals carefully; for both the transmitter and receiver. Also check that the there is enough power in the transmitter.

BTW, which radio are you using?

[readytogo]

I can Fly !!

Thank You guys for ur help. I had solved the problem. I would like to know who is flying in Sembawang and I would like to join u all for flying.

[readytogo]

I can Fly!!

Thank You guys for ur help. I had solved the problem. I would like to know who is flying in Sembawang and I would like to join u all for flying.

BTW i live at Blk 469B (near the big canal).

[Adrianli]

BTW i live at Blk 469B (near the big canal).

Me also stay next to the big canal, 466C. One sec sch away from u.

Go to the mosque there, there r guys flying there. Lee n gang used to fly there. PM Lee to check wif him. I'm a heli flyer, not a plane flyer.