Announcement

Collapse
No announcement yet.

Wts : Motors,wheels,ubec

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Wts : Motors,wheels,ubec

    Used Hextronic motor 20g (2300kV) motor from H O B B Y k I N G : $5
    NIB Hextronic Ubec HXT UBEC 5/6v output, 5.5~23v Input from H O B B Y K I N G $7
    NIB Hextronic motor 2g (2000KV)from H O B B Y K I N G $7
    NIB 30mm diameter ALUMINIUM FOLDING PROP SPINNER for 3mm motor shaft from HOBBY K I N G. $6

    NIB DUBRO 1- 1/4 Inch Tail wheel for .60 Airplanes $3
    NIB DUBRO 2-1/2 Inch 5/32 Inch (4mm) Axle threaded light wheel $11
    Attached Files
    Scratch building is more than cutting balsa wood and gluing them. Its a complex process that will test even the most resilient of people

    #2
    Take all the above and I will give a used 70 cm wingspan HYPERION BEAR CAT EPP RENO RACER KIT
    Scratch building is more than cutting balsa wood and gluing them. Its a complex process that will test even the most resilient of people

    Comment


      #3
      The Free plane to give away if you take ALL the mentioned parts.

      Click image for larger version

Name:	P1040409.JPG
Views:	1
Size:	73.9 KB
ID:	970941
      Scratch building is more than cutting balsa wood and gluing them. Its a complex process that will test even the most resilient of people

      Comment


        #4
        Ups
        Scratch building is more than cutting balsa wood and gluing them. Its a complex process that will test even the most resilient of people

        Comment


          #5
          Ups
          Scratch building is more than cutting balsa wood and gluing them. Its a complex process that will test even the most resilient of people

          Comment


            #6
            Used Hextronic motor 20g (2300kV) motor from H O B B Y k I N G : $5 (SOLD)
            NIB Hextronic Ubec HXT UBEC 5/6v output, 5.5~23v Input from H O B B Y K I N G $7 (SOLD)
            NIB Hextronic motor 2g (2000KV)from H O B B Y K I N G $7
            NIB 30mm diameter ALUMINIUM FOLDING PROP SPINNER for 3mm motor shaft from HOBBY K I N G. $6

            NIB DUBRO 1- 1/4 Inch Tail wheel for .60 Airplanes $3 (SOLD)
            NIB DUBRO 2-1/2 Inch 5/32 Inch (4mm) Axle threaded light wheel $11 (SOLD)

            AIRCRAFT GIVEN OFF!!
            Scratch building is more than cutting balsa wood and gluing them. Its a complex process that will test even the most resilient of people

            Comment

            Working...
            X